Moto-Data

2020 KTM 200 Duke / ABS technical specifications

KTM 200 Duke / ABS technical specifications

Technical specifications

Model: 200 Duke / ABS
Years: 2020
Engine: Four stroke, single cylinder, DOHC,4 valves per cylinder
Capacity: 199.5 cc / 12.2 cuin
Bore x Stroke: 72 x 49 mm
Compression Ratio: 11.5:1
Cooling System: Liquid cooling system, continuouscirculation of cooling liquid with water pump
Lubrication: Pressure circulationlubrication with one rotary pump
Exhaust: Stainless steel silencer withregulated catalytic converter
Induction: Bosch EFI with 38mm throttle body
Spark Plug: Bosch Super R6 VR 5NEW
Ignition: Bosch EMS
Battery: 12V 8Ah, maintenancefree
Starter: Electric
Max Power: 19 kW / 26 hp @ 10000rpm
Max Torque: 20 Nm / 14.75 lb-ft @ 6800rpm
Clutch: Wet multi-disc clutch, mechanicallyoperated
Transmission : 6 Speed 
Primary Drive Ratio: 72:22
Gear Ratios: 1st 12:34 / 2nd 15:31 / 3rd18:28 / 4th 21:26 / 5th 22:23 / 6th 24:22
Final Drive Ratio: 14:43
Final Drive: Chain 520 O-Ring 5/8 x1/4"
Frame: Powdercoated steel trellis w/ bolt-on rearsubframe
Handlebar.: Tapered aluminum, 26-22mm
Front Suspension: Non-adjustable 43mm inverted WP Apex fork
Front Wheel Travel: 117 mm / 4.6 in
Rear Suspension: Linkage-free, spring-preload adjustable WP Apexshock w/ progressive damping
Rear Wheel Travel: 150 mm / 5.0 in
Front Brakes: Single 300 mm disc, radiallymounted ByBre four-piston caliper
Rear Brakes: Single 230 mm disc, floatingByBre caliper
ABS: Bosch 10 MB two-channel w/ Supermoto mode
Wheels: Cast aluminum
Front Wheel: 17 x 3.00
Rear Wheel: 17 x 4.00
Front Tyre: 110/70 - R17 M/C 54S TL
Rear Tyre: 150/60 - R17 M/C 66S TL
Steering Head Angle : 65°
Trail: 100 mm / 3.9 in
Wheelbase: 1357 mm ± 15.5 mm / 53.4 ± 0.6in
Ground Clearance: 140 mm / 5.5 in
Seat Height: 805 mm / 31.6 in
Dry Weight: 132 kg / 330 lbs
Fuel Capacity : 13.4 Litres / 3.5 US gal

KTM motorcycles Back to KTM motorcycles