Honda Rebel 500 / ABS (2017-18) vs KTM 200 Duke / ABS (2020)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | KTM |
| Model: | Rebel 500 / ABS | 200 Duke / ABS |
| Years: | 2017-18 | 2020 |
| Engine: | Four stroke, parallel-twin cylinder, DOHC; 4 valves per cylinder | Four stroke, single cylinder, DOHC, 4 valves per cylinder |
| Capacity: | 471 cc / 28.7 cu-in | 199.5 cc / 12.2 cu in |
| Bore x Stroke: | 67 x 66.8mm | 72 x 49 mm |
| Cooling System: | Liquid-cooled | Liquid cooling system, continuous circulation of cooling liquid with water pump |
| Compression Ratio: | 10.7:1 | 11.5:1 |
| Induction: | PGM-FI | Bosch EFI with 38mm throttle body |
| Ignition: | Full transistorized ignition | Bosch EMS |
| Max Power: | NA | 19 kW / 26 hp @ 10000 rpm |
| Max Torque: | NA | 20 Nm / 14.75 lb-ft @ 6800 rpm |
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | O-ring-sealed chain | Chain 520 O-Ring 5/8 x 1/4" |
| Front Suspension: | 41mm Telescopic fork | Non-adjustable 43mm inverted WP Apex fork |
| Front Wheel Travel: | 121 mm / 4.8 in | 117 mm / 4.6 in |
| Rear Suspension: | Dual shocks with five-position spring preload adjustment | Linkage-free, spring-preload adjustable WP Apex shock w/ progressive damping |
| Rear Wheel Travel: | 96 mm / 3.8 in | 150 mm / 5.0 in |
| Front Brakes: | Single 296mm hydraulic disc with two piston caliper | Single 300 mm disc, radially mounted ByBre four-piston caliper |
| Rear Brakes: | Single 240mm hydraulic disc with single piston caliper | Single 230 mm disc, floating ByBre caliper |
| Front Tyre: | 130/90-16 | 110/70 - R17 M/C 54S TL |
| Rear Tyre: | 150/80-16 | 150/60 - R17 M/C 66S TL |
| Trail: | 110 mm / 4.3 in | 100 mm / 3.9 in |
| Wheelbase: | 1491 mm / 58.7 in | 1357 mm ± 15.5 mm / 53.4 ± 0.6 in |
| Seat Height: | 691 mm / 27.2 in | 805 mm / 31.6 in |
| Ground Clearance: | 137 mm / 5.4 in | 140 mm / 5.5 in |
| Fuel Capacity: | 11.4 Litres / 2.9 US gal | 13.4 Litres / 3.5 US gal |