Harley-Davidson Harley Davidson FXDF-SE Dyna Fat Bob CVO (2009) technical specifications

Harley-Davidson Harley Davidson FXDF-SE Dyna Fat Bob CVO is produced in 2009. Engine is Four stroke, Twin Cam 110™ Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder, displacement 1804 cc / 110.1 cub in. Harley-Davidson Harley Davidson FXDF-SE Dyna Fat Bob CVO weighs 313 kg / 692 lbs. Harley-Davidson Harley Davidson FXDF-SE Dyna Fat Bob CVO has 4 photos.

Technical specifications

+ Add to 'Compare list'

Model:	Harley Davidson FXDF-SE Dyna Fat Bob CVO
Years:	2009
Engine:	Four stroke, Twin Cam 110™ Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Capacity:	1804 cc / 110.1 cub in.
Bore x Stroke:	101.6 x 111.3 mm
Cooling System:	Air cooled
Compression Ratio:	9.15:1
Induction:	Electronic Sequential Port Fuel Injection (ESPFI)
Ignition:	Single-fire, non-wasted, map-controlled spark ignition
Starting:	Electric
Max Torque:	155.5 Nm / 114.0 ft lbs @ 3500 rpm
Clutch:	Multi-plate, wet
Transmission:	6 Speed
Final Drive:	Belt
Gear Ratio:	1st 9.312 / 2nd 6.421 / 3rd 4.774 / 4th 3.926 / 5th 3.279 / 6th 2.79
Frame:	Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension:	49 mm with polished aluminum fork triple clamp and dual-rate springs,
Rear Suspension:	Coil over shock
Front Brakes:	2x 299.7mm disc 4 piston caliper
Rear Brakes:	Single 292mm disc 4 piston caliper
Front Tyre:	130/90B -16
Rear Tyre:	180/70B -16
Seat Height:	665 mm / 26.2 in
Dry Weight:	313 kg / 692 lbs
Fuel Capacity:	18.9 Litres / 5.0 US gal