Benelli 125 Enduro (1980) technical specifications
Benelli 125 Enduro is produced in 1980. Engine is Two stroke, twin cylinder, displacement 125 cc / 7.6 cu in Benelli 125 Enduro top speed is 105 km/h / 65 mph. Benelli 125 Enduro weighs 98kg / 2161b.. Benelli 125 Enduro has 3 photos.
Technical specifications
+ Add to 'Compare list'| Model: | 125 Enduro |
| Years: | 1980 |
| Engine: | Two stroke, twin cylinder |
| Capacity: | 125 cc / 7.6 cu in |
| Bore x Stroke: | 56 x 49 mm |
| Compression Ratio: | 9.83:1 |
| Cooling System: | Air/oil cooled |
| Induction: | Dell'Orto VHB 22BS |
| Ignition: | Flywheel magneto 6 volt |
| Starting: | Kick start |
| Clutch: | Wet, multiplate |
| Transmission: | 5 Speed |
| Final Drive: | Chain |
| Gear Ratio: | 1st 27.45 / 2nd 16.73 / 3rd 12.88 / 4th 10.67 / 5th 8.87:1 |
| Frame: | Welded, tubular, twin-downtube cradle. |
| Front Suspension: | Telescopic, oil damped. |
| Rear Suspension: | Box-section swinging arm controlled by oil-damped, coil-sprung suspension units with 3 pre-load settings. |
| Front Brakes: | 135 mm Drum |
| Rear Brakes: | 135 mm Drum, caliper type |
| Front Wheel: | 2.50-21 |
| Rear Wheel: | 3.50-18 |
| Dimensions: | Length: 1971 mm / 77.6 in Width: 841 mm / 33.1 in Height: 1120 mm / 44.1 in |
| Wheelbase: | 1285 mm / 50.6 in. |
| Ground Clearance: | 229 mm / 9.0 in. |
| Seat height:: | 813 mm / 32.0 in |
| Dry Weight: | 98kg / 2161b. |
| Fuel Capacity: | 8.5 Litres / 1.9 US gal. |
| Top Speed: | 105 km/h / 65 mph |
| Colours: | Red, Black, Green, Blue, Yellow |
Back to Benelli motorcycles
Reviews score
★
0.0
/0 rewiews
Appearance
0.0
Comfort
0.0
Performance
0.0
Durability
0.0
Maintenance cost
0.0
Appearance
0
Comment (not required)
Comfort
0
Comment (not required)
Performance
0
Comment (not required)
Durability
0
Comment(not required) - common problems
Maintenance cost
0
Comment (not required)
Additional comment(not required)
Compare bike
Moto-data World
Riders submitted photos
Photos
