Yamaha YZF 600 R6 (2012) vs Benelli 125 Enduro (1980)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Yamaha | Benelli |
| Model: | YZF 600 R6 | 125 Enduro |
| Years: | 2012 | 1980 |
| Engine: | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. | Two stroke, twin cylinder |
| Capacity: | 599 cc / 36.5 cu-in | 125 cc / 7.6 cu in |
| Bore x Stroke: | 67 x 42.5 mm | 56 x 49 mm |
| Compression Ratio: | 13.1;1 | 9.83:1 |
| Cooling System: | Liquid cooled | Air/oil cooled |
| Induction: | 41 mm Mikuni throttle body F.I. | Dell'Orto VHB 22BS |
| Ignition: | TCI | Flywheel magneto 6 volt |
| Starting: | Electric | Kick start |
| Clutch: | Wet, slipper, cable operated | Wet, multiplate |
| Transmission: | 6 Speed | 5 Speed |
| Final Drive: | O-ring chain | Chain |
| Gear Ratio: | 1st 31/12 (2.583) / 2nd 32/16 (2.000) / 3rd 30/18 (1.667) / 4th 26/18 (1.444) / 5th 27/21 (1.286) / 6th 23/20 (1.150) | 1st 27.45 / 2nd 16.73 / 3rd 12.88 / 4th 10.67 / 5th 8.87:1 |
| Frame: | Deltabox aluminium frame with revised rigidity balance | Welded, tubular, twin-downtube cradle. |
| Front Suspension: | Fully adjustable 41 mm inverted cartridge fork, | Telescopic, oil damped. |
| Rear Suspension: | Fully adjustable link Monocross; 4-way adjustable, | Box-section swinging arm controlled by oil-damped, coil-sprung suspension units with 3 pre-load settings. |
| Front Brakes: | 2x 310mm discs 4 piston calipers | 135 mm Drum |
| Rear Brakes: | Single 220mm disc 1 piston caliper | 135 mm Drum, caliper type |
| Dimensions: | Length 2040mm / 80.3in Width 705mm / 27.8'in Height 1095mm / 43.1in | Length: 1971 mm / 77.6 in Width: 841 mm / 33.1 in Height: 1120 mm / 44.1 in |
| Wheelbase: | 1375 mm / 54.1 in | 1285 mm / 50.6 in. |
| Ground Clearance: | 130 mm / 5.1 in | 229 mm / 9.0 in. |
| Seat Height: | 850 mm / 33.5 in | 813 mm / 32.0 in |
| Fuel Capacity: | 17.5 Liters / US 3.7 gal | 8.5 Litres / 1.9 US gal. |
| Top Speed: | 256.9 km/h | 105 km/h / 65 mph |