Moto-Data

Aprilia Tuono V4 R (2011) technical specifications

Aprilia Tuono V4 R technical specifications

Aprilia Tuono V4 R is produced in 2011. Engine is Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder, displacement 998.9 cc / 60.96 cu in , produces power 120.8 kW / 162 hp @ 11000 rpm and 110 Nm / 11.2 kgf-m / 81.1 lb-ft @ 9000 rpm. Aprilia Tuono V4 R top speed is 269.2 km/h / 167.3 mph. Aprilia Tuono V4 R weighs 179 kg / 395 lbs. Aprilia Tuono V4 R has 3 photos.

Technical specifications

+ Add to 'Compare list'
Model: Tuono V4 R
Years: 2011
Engine: Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder
Capacity: 998.9 cc / 60.96 cu in
Bore x Stroke: 78 x 52.3 mm
Compression Ratio: 13.0:1
Cooling System: Liquid cooled
Induction: Airbox with front dynamic air intakes. 4 Weber-Marelli Ø48 mm throttle bodies with 4 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R (Road)
Ignition: Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and "stick-coil" type coils Electric.
Starting: Electric
Alternator: Flywheel mounted 450W alternator with rare earth magnets
Lubrication: Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)
Exhaust: 4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine management system controlled butterfly valve and integrated trivalent catalytic converter . Euro4
Max Power: 120.8 kW / 162 hp @ 11000 rpm
Max Torque: 110 Nm / 11.2 kgf-m / 81.1 lb-ft @ 9000 rpm
Clutch: Multiplate wet clutch with mechanical slipper system
Transmission: 6 Speed
Final Drive: Chain
Final Drive Ratio: 42:16 (2,625)
Gear Ratio: 1st: 39:15 (2.600) / 2nd: 33:16 (2.063) / 3rd: 34:20 (1.700) / 4th: 32:22 (1,455) / 5th: 34:26 (1,308) / 6th: 33:27 (1,222)
Steering angle: 24.5°
Trail: 105 mm / 4.1 in
Frame: Aluminium dual beam chassis with pressed and cast sheet elements. Sachs steering damper.
Front Suspension: Sachs upside down front fork with Ø43 mm stanchions. Low profile forged aluminium caliper mountings for radial calipers. Completely adjustable spring preload and hydraulic compression and rebound damping.
Front Wheel Travel: 120 mm / 4.7 mm
Rear Suspension: Double braced aluminium swingarm; mixed low thickness and sheet casting technology. Sachs piggy back monoshock with completely adjustable: spring preload and hydraulic compression and rebound damping. APS progressive linkage.
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2x Ø320 mm floating stainless steel discs with lightweight stainless steel rotor with 6 studs. Brembo radial calipers with 4 horizontally opposed Ø32 mm pistons. Sintered pads. Axial pump master cylinder and metal braided brake hoses.
Rear Brakes: Single Ø220 mm diameter disc, Brembo floating caliper with two Ø32 mm isolated pistons. Pump with integrated tank and metal braided hose
Front Tyre: 120/70 ZR17
Rear Tyre: 190/55 ZR 17 (alternative: 190/50 ZR 17; 200/55 ZR 17)
Dimensions: Length: 2065 mm / 81.2 in Width: 800 mm / 31.4 in (at the handlebar) Height: 1090 mm / 42.9 in
Ground Clearance: 125 mm / 4.9 in
Wheelbase: 1435 mm / 56.8 in
Seat Height: 840 mm / 33.1 in
Dry Weight: 179 kg / 395 lbs
Fuel Capacity: 17 Litres / 4.5 US gal
Fuel Reserve: 4 Litres / 1.1 US gal
Average Consumption: 7 L/100 km / 14.3 km/l / 33.6 US mpg
Standing ¼ Mile: 10.8 sec
Top Speed: 269.2 km/h / 167.3 mph

Riders reviews


No riders reviews. Be the first to review this bike.
Aprilia motorcycles Back to Aprilia motorcycles