Suzuki RM250 Paul Edmondson Replica (2007) technical specifications
Suzuki RM250 Paul Edmondson Replica is produced in 2007. Engine is Two stroke, single cylinder, displacement 249 cc / 15.2 cu in Suzuki RM250 Paul Edmondson Replica has 2 photos.
Technical specifications
+ Add to 'Compare list'| Model: | RM250 Paul Edmondson Replica |
| Years: | 2007 |
| Production: | 50 Units |
| Engine: | Two stroke, single cylinder |
| Capacity: | 249 cc / 15.2 cu in |
| Bore x Stroke: | 66.4 x 72.0 mm |
| Compression Ratio: | 10.7:1 (ex valve closed), 8.9:1 (ex valve open) |
| Cooling System: | Liquid cooled |
| Induction: | Keihin PWK38PWJ/TPS |
| Ignition: | Electronic CDI |
| Starting: | Kick |
| Transmission: | 5 Speed |
| Final Drive: | Chain |
| Clutch: | Wet, multi-plate |
| Front Suspension: | Kayaba inverted cartridge, 18 step rebound, 20-step compression damping adjustable |
| Front Wheel Travel: | 300 mm / 11.8 in |
| Rear Suspension: | Kayaba link-type, 18-step rebound, 3-turn high, 16-step low speed compression damping, preload adjustable |
| Rear Wheel Travel: | 320 mm / 12.6 in |
| Front Brakes: | Single 250 mm disc, 2 piston caliper |
| Rear Brakes: | Single 240mm disc, 1 piston caliper |
| Front Tyre: | 100/90 -21 |
| Rear Tyre: | 110/90 -18 |
| Seat Height: | 965 mm / 38 in |
| Fuel Capacity: | 8.0 litres / 2.1 US gal / 1.8 Imp gal |
| Reviews: | MCN / Easier.com / Motocorse |
Back to Suzuki motorcycles
Reviews score
★
0.0
/0 rewiews
Appearance
0.0
Comfort
0.0
Performance
0.0
Durability
0.0
Maintenance cost
0.0
Appearance
0
Comment (not required)
Comfort
0
Comment (not required)
Performance
0
Comment (not required)
Durability
0
Comment(not required) - common problems
Maintenance cost
0
Comment (not required)
Additional comment(not required)
Compare bike
Moto-data World
Riders submitted photos
Photos
