1979 Suzuki PE 250 technical specifications

Technical specifications

Model: PE 250
Years: 1979-80
Engine: Two stroke, single cylinder, piston and reed valve
Capacity: 246 cc / 15.0 cu in
Bore x Stroke: 67 x 70 mm
Compression Ratio: 7.1:1
Cooling System: Air cooled
Lubrication System: Fuel/oil premix, 20:1
Induction: Mikuni VM36SS carburetor
Ignition: Suzuki PEI
Spark Plug: NGK B10EV, Nippon DENSO W31ES-G
Starting: Kick
Max Power: 22.5 kW / 30.5 hp @ 8000 rpm
Max Torque: 27.5 Nm / 2.79 kgf-m / 20.2 lb-ft @ 7500 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed
Final Drive: Chain, DAIDO DID 520UB, 110 links
Primary Reduction: 2.727 (60/22)
Final Reduction: 4.000 (52/13)
Gear Ratios: 1st 2.666 (32/12) / 2nd 1.750 (28/16) / 3rd 1.200 (24/20) / 4th 0.913 (21/23) / 5th 0.692 (18/26)
Front Suspension: Telescopic phneumatic/coil spring, oil dampened
Rear Suspension: Swingarm. gas/oil dampened spring, 3-way adjustable
Front Brakes: Drum, internal expanding
Rear Brakes: Drum, internal expanding
Front Tyre: 3.00-21 4PR
Rear Tyre: 4.50-18 4PR
Caster: 60o
Trail: 130 mm / 5.12 in
Steering Angle: 50o (left & right)
Turning Radius: 2.1 m / 6.9 ft
Dimensions: Length: 2150 mm / 84.6in Width: 855 mm / 33.7 in Height: 1200 mm / 47.2 in
Wheelbase: 1455 mm / 57.3 in
Ground Clearance: 280 mm / 11.0 in
Dry-Weight: 111 kg / 245 lbs
Transmission Oil Capacity: 0.8 Litres / 0.85 US qt / 0.7 Imp qt
Fuel Capacity: 11.5 Litres / 3.0 US gal / 2.5 Imp gal
Review: Motorcycle-USA

Photo gallery