2008 Harley-Davidson Harley Davidson FXDF Dyna Fat Bob technical specifications

Technical specifications

Model: Harley Davidson FXDF Dyna Fat Bob
Years: 2008
Engine: Four stroke, 45° V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.3 x 111.1 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 124.7 Nm / 92 ft/ lbs. @ 3000 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.312 / 2nd 6.421 / 3rd 4.774 / 4th 3.926 / 5th 3.279 / 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs
Rear Suspension: Coil over shock
Front Brakes: 2x 299mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 2 piston caliper
Front Tyre: D427F 130/90B16 67H
Rear Tyre: D427 180/70B16 77H
Rake: 29°
Fork Angle: 28°
Trail: 125 mm / 4.9 in
Dimensions: Length 2329.9 mm / 91.7 in width 889.76 mm / 35.0 in Height 1131.82 mm / 44.5 in
Wheelbase: 1619.7 mm / 63.7 in
Seat Height: Laden2 663 mm / 26.1 in Unladen 686 mm / 27.0 in
Dry Weight: 303.7 kg / 7 lbs
Wet Weight: 320.0 kg / 706 lbs
Gross Vehicle Weight Rating: 392.2 kg / 1085 lbs
Fuel Capacity: 18 9 Litres / 5.0 US gal

Photo gallery