CR&S CR&S Duu Alegher () technical specifications
			CR&S CR&S Duu Alegher is produced in . Engine is S & S X-Wedge, four stoke, 56 ° V-Twin, 2 Valves per cylinder, displacement 1917 cc / 117 cu-in CR&S CR&S Duu Alegher has 3 photos.
Technical specifications
+ Add to 'Compare list'| Model: | CR&S Duu Alegher | 
| Years: | |
| Engine: | S & S X-Wedge, four stoke, 56 ° V-Twin, 2 Valves per cylinder | 
| Capacity: | 1917 cc / 117 cu-in | 
| Bore x Stroke: | 1104.8 x 111.1 mm | 
| Cooling System: | Air cooled | 
| Compression Ratio: | 9.75:1 | 
| Lubrication: | Dry sump | 
| Induction: | Injection, single injector per cylinder, 55 mm throttle body | 
| Starting: | Electric | 
| Clutch: | Wet multiplate with hydraulic control | 
| Transmission: | 5 or 6 Speed (6-speed option) | 
| Primary Drive: | Chain double oil bath | 
| Final Drive: | Chain with "O" ring | 
| Frame: | Main frame tube relevant section stainless steel cradle and slide motor boxed stainless steel frame and box-seat carrier light alloy. Collagamento plates are made of light alloy | 
| Swingarm: | Single arm, pipe section with significant box-truss, stainless steel. | 
| Front Suspension: | 48 mm Upside down fork adjustable rebound and preload | 
| Front Wheel Travel: | 120 mm / 4.7 in | 
| Rear Suspension: | Swingarm with monoshock teleidraulico, progressive, adjustable rebound and preload. | 
| Rear Wheel Travel: | 128 mm / 5.0 in | 
| Front Brakes: | 2x 320mm floating disc, 2 piston calipers | 
| Rear Brakes: | Single 260mm disc, 2 piston caliper | 
| Front Wheel: | 3.50 x 17 " | 
| Rear Wheel: | 6.00 x 17 " | 
| Front Tyre: | 120/70 ZR17 | 
| Rear Tyre: | 190/55-ZR17 |