Yamaha TW 200 (1992-94) vs Honda CB 125T (1978-79*) vs BMW R 51/3 (1951-55)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Yamaha | Honda | BMW |
| Model: | TW 200 | CB 125T | R 51/3 |
| Years: | 1992-94 | 1978-79* | 1951-55 |
| Engine: | Four stroke, single cylinder, SOHC, 2-valve | Four stroke, twin cylinder, OHC, 2 valve per cylinder | Four stroke, two cylinder horizontally opposed Boxer, pushrod operated 2 valves per cylinder. |
| Capacity: | 196 cc / 11.96 cub in. | 124 cc / 7.6 cu-in | 494 cc / 30.1 cu in. |
| Bore x Stroke: | 67 x 55.7 mm | 44 x 41mm | 68 x 68 mm |
| Cooling System: | Air cooled | Air cooled | Air cooled |
| Compression Ratio: | 9.5:1 | 7.4:1 | 6.3:1 |
| Ignition: | CDI | Battery & coil | Bosch coil with manual advance by the handlebar lever |
| Starting: | Electric | Kick | Kick |
| Max Power: | 16 hp / 11.7 kW @ 8000 rpm | 15 hp / 10.9 kW @ 10500 rpm | 18 kW / 24 hp @ 5800 rpm |
| Clutch: | Multi-plate wet clutch | Multi-disc, wet | Single plate, dry |
| Transmission: | 5-Speed, constant mesh | 5 Speed | 4 Speed |
| Final Drive: | Chain | Chain | Shaft |
| Front Suspension: | 33mm Telescopic fork | 31mm oil-damped telescopic forks | Telescopic fork with hydraulic damping, plunger type |
| Rear Suspension: | Drum | Pivoted fork, 2 coil spring, hydraulically damped, 5 preload settings | Spring with coil compression springs and rubber deflection stops |
| Front Brakes: | Single disc, 220 mm | Single 240mm disc | ∅200mm Drum, duplex full hub |
| Rear Brakes: | 110mm Dru | 130mm drum | ∅200mm Drum, simplex full hub |
| Front Tyre: | 130/80 -18 in | 2.75 -18 | 3.50 -19" Metzeler |
| Rear Tyre: | 180/80 -14 in | 3.00 -18 | 3.50 -19" Metzeler |
| Fuel Capacity: | 6.8 Litres / 1.7 US gal | 11.5 Litres / 3.0 US gal | 17 liters / 4.4 US gal |