Triumph Tiger 900 GT Aragón Edition (2024) vs Harley-Davidson Harley Davidson FXDWG Dyna Wide Glide 105th Anniversary Edition (2008)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Triumph | Harley-Davidson |
| Model: | Tiger 900 GT Aragón Edition | Harley Davidson FXDWG Dyna Wide Glide 105th Anniversary Edition |
| Years: | 2024 | 2008 |
| Engine: | Four stroke, transverse three cylinder, DOHC, 4 valve per cylinder. | Four stroke, 45° V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder |
| Capacity: | 888 cc / 54.1 cu-in | 1584 cc / 96 cu-in |
| Bore x Stroke: | 78 x 61.9 mm | 95.3 x 111.1 mm |
| Cooling System: | Liquid cooled | Air cooled |
| Compression Ratio: | 11.27:1 | 9.2:1 |
| Induction: | Multipoint sequential electronic fuel injection | Electronic Sequential Port Fuel Injection (ESPFI) |
| Ignition: | Digital CDI | Single-fire, non-wasted, map-controlled spark ignition |
| Starting: | Electric | Electric |
| Max Torque: | 87 Nm / 64.1 lb-ft @ 7250 rpm | 124.7 Nm / 92 ft/ lbs. @ 3000 rpm |
| Clutch: | Wet, multi-plate | Multi-plate, wet |
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | O-ring chain | Belt |
| Frame: | Tubular steel frame, bolt on sub frame | Mild steel, tubular frame; rectangular section backbone; stamped, cast, and forged junctions; forged fender supports; MIG welded |
| Front Suspension: | Marzocchi 45 mm upside down forks, manual rebound and compression damping adjustment. | 49 mm with polished aluminum fork triple clamp and dual-rate springs, |
| Rear Suspension: | Marzocchi rear suspension unit, electronically adjustable preload and rebound damping. | Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded, Coil over shock , |
| Front Brakes: | 2 x 320mm floating discs, Brembo Stylema 4 piston Monobloc calipers. Radial front master cylinder | Single 300mm disc 4 piston caliper |
| Rear Brakes: | Single 255mm disc, Brembo single piston sliding caliper | Single 292mm disc 4 piston caliper |
| Front Tyre: | 100/90-19 | 80/90-21 |
| Rear Tyre: | 150/70R17 | 180/60B17 |
| Rake: | 24.6° | 34° |
| Trail: | 133.3 mm / 5.24 in | 132 mm / 5.2 in. |
| Dimensions: | Width 930 mm / 36.6 in Height 1410 - 1460 mm / 55.5 - 57.5 in | Length 2387.6 mm / 94.0 in Width 944.8 mm / 37.2 in Height 1214.1 mm / 47.8 in |
| Wheelbase: | 1556 mm / 61.25 in | 1715 mm / 67.5 in |
| Seat Height: | 820 - 840 mm / 32.3 - 33.1 in | Laden 648 mm / 25.5 in. Unladen .678 mm / 26.7 in |
| Dry Weight: | 198 kg / 436.5 lbs | 293 kg / 647 lbs |
| Fuel Capacity: | 20 Litres / 5.28 US gal | 17.8 Litres / 4.7 US gal |