Moto-Data

Triumph TF 250-E (2026) vs Honda XR 250 (1980)

Comparison technical specifications


Add bike
2026 Triumph TF 250-E
Remove bike
1980 Honda XR 250
Remove bike
Make: Triumph Honda
Model: TF 250-E XR 250
Years: 2026 1980
Engine: Four stroke, single cylinder, DOHC, Del West titanium valves Four stroke, single cylinder SOHC, 4 valve
Capacity: 249.9 cc / 15.2 cu in 249 cc / 15.2 cu-in
Bore x Stroke: 78 x 52.3 mm 74 x 57.8 mm
Compression Ratio: 14.4:1 9.6:1
Cooling System: Liquid cooled Air cooled
Induction: Dell?Orto EFI with 44mm throttle body 2x 30.5 mm piston valve Keihin carburetor
Ignition: EMS CDI Capasitor-Discharge
Starting: Electric Kick
Max Power: 32 kw / 42 hp @12800 rpm 30 hp / 21.9 kW @ 9000 rpm
Max Torque: 27.8 Nm/ 20.5 ft-lbs 24.5 Nm / 18 lb-ft @ 7500 rpm
Clutch: Exedy wet multiplate Wet, four friction discs
Transmission: 6-Speed 5 Speed
Final Drive: Chain, 13/52 Chain
Front Suspension: 48 mm Fully adjustable KYB inverted fork, compression and rebound adjustble Leading axel hydraulic 38mm forks
Front Wheel Travel: 300 mm / 11.8 in 223.5 mm / 8.8 in
Rear Suspension: Fully adjustable KYB shock with adjustable linkage Inverted lay-down gas-charged shocks, three step spring pre-load
Rear Wheel Travel: 312 mm / 12.3 in 198 mm / 7.8 in
Front Brakes: Single Galfer 260mm disc with Brembo 2-piston caliper Drum
Rear Brakes: Single Galfer 245mm disc with Brembo single-piston caliper Drum
Wheels: Wire-spoke with D.I.D DirtStar 7000 rims and machined cast aluminum hubs DID shoulderless aluminum alloy
Front Tyre: 90/90 x 21 3.00-23
Rear Tyre: 140/90 x 18 4.60-18
Dimensions: Length 2243 mm / 88.3 in Width 836 mm / 32.9 in Height 1264 mm / 49.8 in (without mirrors) Length 2210 mm / 87 in Width 874 mm / 34.4 in Height 1210mm / 47.6 in
Wheelbase: 1488 mm/ 58.6 in 1400 mm / 55.1 in
Seat Height: 955 mm /37.6 in 880 mm / 34.6 in
Fuel Capacity: 8.3 L / 2.2 gal 9.8 Litres / 2.6 US gal