Triumph Speed Triple 1200RR Bond Edition (2023) vs Harley-Davidson Harley Davidson FXDF Dyna Fat Bob (2012) vs MV Agusta 350 Scrambler B (1972-74)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Triumph | Harley-Davidson | MV Agusta |
| Model: | Speed Triple 1200RR Bond Edition | Harley Davidson FXDF Dyna Fat Bob | 350 Scrambler B |
| Years: | 2023 | 2012 | 1972-74 |
| Engine: | Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder | Four stroke, V-Twin, Twin Cam 103™ with integrated oil cooler | Four stroke, 20° inclination parallel twin cylinder, OHV engine with rocker support |
| Capacity: | 1160 cc / 70.7 cu-in | 1690 cc / 103 cu. in | 349 cc / 21.3 cu-in |
| Bore x Stroke: | 90 x 60.8 mm | 98.4 x 111.3 mm | 63 x 56 mm |
| Cooling System: | Liquid-cooled | Air cooled | Air cooled |
| Compression Ratio: | 13.2:1 | 9.6:1 | 9.2:1 |
| Induction: | Multipoint sequential electronic fuel injection with electronic throttle control | Electronic Sequential Port Fuel Injection (ESPFI) | 2x 24mm Dell'Orto carburetors |
| Ignition: | Electronic | Single-fire, non-wasted, map-controlled spark ignition | Electronic |
| Starting: | Electric | Electric | Kick |
| Clutch: | Wet, multi-plate, slip & assist | Multi-plate, wet | Wet multiple plate clutch |
| Transmission: | 6 Speed | 6 Speed | 5 Speed |
| Final Drive: | X-ring chain | Belt | Chain |
| Frame: | Aluminium twin spar frame, bolt-on aluminium rear subframe | Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded | Single beam tubular and pressed steel |
| Front Suspension: | Öhlins 43mm fully adjustable USD forks. Öhlins S-EC 2.0 OBTi system electronic compression / rebound damping | 49 mm with polished aluminum fork triple clamp and dual-rate springs, | Telescopic hydraulic fork |
| Rear Suspension: | Öhlins monoshock RSU with linkage. Öhlins S-EC 2.0 OBTi system electronic compression / rebound damping | Coil over shock | Swinging arm fork with adjustable hydraulic shock absorbers |
| Front Brakes: | 2 x 320mm floating discs. Brembo Stylema monobloc calipers, OC-ABS, radial master cylinder with separate reservoir, span & ratio adjustable | Single 300mm disc 4 piston caliper | 200mm Drum |
| Rear Brakes: | Single 220mm disc. Brembo twin piston caliper, OC-ABS. Rear master cylinder with separate reservoir | Single 292mm disc 2 piston caliper | 200mm Drum |
| Front Tyre: | 120/70 ZR 17 (58W) Pirelli Diablo Supercorsa SP V3 | 130/90B16 67 | 2.75-18 |
| Rear Tyre: | 190/55 ZR 17 (75W) Pirelli Diablo Supercorsa SP V3 | 180/70B16 77H | 3.25-18 |
| Dimensions: | Length: 2085 mm / 82 in Width: 758 mm / 30 in Height: 1120 mm / 44 in | Length 2329 mm / 91.7 in Width 889 mm / 35.0 in Height 1130 mm / 44.5 in. | Length: 1960 mm / 77.1 in Width: 620 mm / 24.4 in |
| Wheelbase: | 1439 mm / 56.5 in | 1618 mm / 63.7 in. | 1300 mm / 51.1 in |
| Fuel Capacity: | 15.5 Litres / 4.1 US gal | 18.9 Litres / 5.0 US gal | 13 Litres / 3.7 US gal |