SWM Superdual X (2018) vs Harley-Davidson Harley Davidson FXDF Dyna Fat Bob (2010) vs MV Agusta Brutale 990R (2011)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | SWM | Harley-Davidson | MV Agusta |
| Model: | Superdual X | Harley Davidson FXDF Dyna Fat Bob | Brutale 990R |
| Years: | 2018 | 2010 | 2011 |
| Engine: | Four stroke, single cylinder, SOHC, 4 valves | Four stroke, 45° V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder | Four stroke, transverse four cylinder. DOHC, 4 radial valves per cylinder |
| Capacity: | 600 cc / 36.6 cu-in | 1584 cc / 96 cu-in | 998 cc / 60.9 cu-in |
| Bore x Stroke: | 100 x 76.4 mm | 95.3 x 111.1 mm | 76 x 55 mm |
| Compression Ratio: | 12.4:1 | 9.2:1 | 13.0:1 |
| Induction: | Mikuni D45 EFI Electronic injection | Electronic Sequential Port Fuel Injection (ESPFI) | Mulitpoint electronic injection |
| Ignition: | Electronic, inductive discharge, w/digital control | Single-fire, non-wasted, map-controlled spark ignition | Digital CDI |
| Starting: | Electric | Electric | Electric |
| Clutch: | Wet multi-plate with hydraulic control | Multi-plate, wet | Wet, multiplate |
| Transmission: | 6 Speed | 6 Speed | 6 Speed |
| Final Drive: | Chain | Belt | Chain |
| Gear Ratio: | 1st 2,615 (34/13) / 2nd 1,812 (29/16) / 3rd 1,350 (27/20) / 4th 1,091 (24/22) / 5th 0,916 (22/24) / 6th 0,769 (20/26) | 1st 9.312 / 2nd 6.421 / 3rd 4.774 / 4th 3.926 / 5th 3.279 / 6th 2.79 | 1st Speed 13/38 109.7 km/h (68.1 mph) at 11600 rpm 2nd Speed 16/34 150.8 km/h (93.6 mph) at 11600 rpm 3rd Speed 18/32 180.3 km/h (111.9 mph) at 11600 rpm 4t Speed 20/30 213.7 km/h (132.7 mph) at 11600 rpm 5th Speed 22/29 243.2 km/h (151.0 mph) at 11600 rpm 6th Speed 19/23 265.0 km/h (164.5 mph) at 11600 rpm |
| Frame: | Main frame Steel single tube cradle Sub-frame aluminum | Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded | CrMo Steel tubular trellis (TIG welded) Rear swing arm pivot plates: material Aluminium alloy |
| Front Suspension: | 45mm Upside-Down fork | 49 mm with polished aluminum fork triple clamp and dual-rate springs | UPSIDE - DOWN” telescopic hydraulic fork with external and separated adjustment of rebound and compression damping and of spring preload Rod dia. 50 mm |
| Rear Suspension: | Sachs adjustable shock | Coil over shock | Progressive, single shock absorber with rebound damping and spring preload adjustment Single sided swing arm: materiale Aluminium alloy |
| Front Brakes: | Single 300mm disc | 2x 299mm disc 4 piston caliper | 2x 310mm discs 4 piston caliper |
| Rear Brakes: | Single 240mm disc, Switchable ABS | Single 292mm disc 2 piston caliper | Single 210mm disc 4 piston caliper |
| Front Tyre: | 90/90 -21 | D427F 130/90B16 67H | 120/70 ZR 17 |
| Rear Tyre: | 140/80 -18 | D427 180/70B16 77H | 190/55 ZR 17 |
| Wheelbase: | 1495 mm / 58.7 in | 1619.7 mm / 63.7 in | 1438 mm / 56.6 in |
| Seat Height: | 890 mm / 35.0 in | Laden2 663 mm / 26.1 in Unladen 686 mm / 27.0 in | 830 mm / 32.6 in |
| Fuel Capacity: | 19 Litres / 5.0 US gal | 18 9 Litres / 5.0 US gal | 23 Litres / 6.0 US gal |