Suzuki Intruder M 1500 (2013-14) vs Ducati 125 Cadet/4 / Cadet/4 Lusso / Cadet/4 Scrambler (1967-68)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Suzuki | Ducati |
| Model: | Intruder M 1500 | 125 Cadet/4 / Cadet/4 Lusso / Cadet/4 Scrambler |
| Years: | 2013-14 | 1967-68 |
| Engine: | Four stroke, 54° V-Twin, SOHC, 4 valve per cylinder | Four stroke, single-cylinder, OHV, pushrod |
| Capacity: | 1462 cc / 89.2 cu. in | 121.3 cc / 7.4 cu in |
| Bore x Stroke: | 96 x 101 mm | 53 x 55 mm |
| Cooling System: | Liquid cooled | Air cooled |
| Compression Ratio: | 9.5:1 | 8.4:1 |
| Induction: | EFI, 2 x 56mm throttle bodies | Dell'Orto ME18BS |
| Ignition: | Electronic | 6V, 28W generator, coil |
| Starting: | Electric | Kick |
| Max Power: | 66.6 hp / 49 kW @ 4800 rpm | 4.8 kW / 6.5 hp @ 6500 rpm |
| Transmission: | 5 Speed | 4 Speed |
| Final Drive: | Shaft | Chain |
| Front Suspension: | Inverted telescopic forks, oil damped | Marzocchi hydraulically damped telescopic forks |
| Rear Suspension: | Link type, coil spring, oil damped adjustable spring preload | Swingarm, dual chocks |
| Front Brakes: | 2 x 290 mm Discs, 3 piston calipers | 118 mm Drum |
| Rear Brakes: | Single 274 mm disc 2 piston caliper | 118 mm Drum |
| Front Tyre: | 120/70ZR18M/C (59W), tubeless | 1967 Cadet: 2.25 x 18 1968 Cadet & Lusso: 2.50 x 18 Scrambler: 2.75 x 18 |
| Rear Tyre: | 200/50ZR17M/C (75W), tubeless | 1967 Cadet: 2.50 x 18 1968 Cadet & Lusso: 2.75 x 18 Scrambler: 3.25 - 3.50 x 16 |
| Dimensions: | Length 2390 mm / 94.1 in Width 970 mm / 34.3 in Height 1100 mm / 43.3 in | Length: 1810 mm / 71.3 in Height: 770 mm / 30.3 in |
| Wheelbase: | 1690 mm / 66.5 in | 1160 mm / 45.7 in |
| Seat Height: | 716 mm / 28.2 in | 670 mm / 26.4 in |
| Fuel Capacity: | 18 Litres / 4.8 US gal / 4.0 Imp gal | 14 L / 3.7 Us gal / 3.1 Imp gal |