Royal Enfield Classic 350 Trials Works Replica (2019)
Comparison technical specifications
Add bike |
Remove bike |
| Make: | Royal Enfield |
| Model: | Classic 350 Trials Works Replica |
| Years: | 2019 |
| Engine: | Four Stroke, single cylinder, OHV, SI Engine, Twinspark |
| Capacity: | 346 cc / 21.1 cu-in |
| Bore x Stroke: | 70 x 90mm |
| Cooling System: | Air Cooled |
| Compression Ratio: | 8.5:1 |
| Exhaust: | One-into-one |
| Induction: | BS29 / UCAL |
| Ignition: | Digital TCI |
| Starting: | Electric & Kick |
| Max Power: | 19.8 hp / 15.3 kW @ 5250 rpm |
| Max Torque: | 28 Nm / 15.4 lb-ft @ 4000 rpm |
| Clutch: | Wet, multiplate |
| Transmission: | 5 Speed, constant mesh |
| Final Drive: | Chain |
| Frame: | Single Down Tube, using engine as stressed member |
| Front Suspension: | 35mm Hydraulic telescopic forks |
| Front Wheel Travel: | 130 mm / 5.1 in |
| Rear Suspension: | Twin shocks, gas charged with 5-step adjustable preload |
| Rear Wheel Travel: | 80 mm / 3.1 in |
| Front Brakes: | Single 280mm disc, 2 piston caliper, ABS |
| Rear Brakes: | 240 mm disk, 1 piston floating caliper, ABS |
| Front Tyre: | 90/90-19 - 52 P |
| Rear Tyre: | 110/80-18 - 62 P |
| Dimensions: | Length: 2080 mm / 81.9 in Width: 805 mm / 31.7 in Height: 1123 mm / 44.2 in |
| Wheelbase: | 1390 mm / 54.7 in |
| Ground Clearance: | 135 mm / 5.3 in |
| Seat Height: | 800 mm / 31.5 in |
| Wet Weight: | 187 kg / 412.3 lbs |
| Fuel Capacity: | 13.5 Litres / 29.7 US gal |