Paton 500 V90 (1976-85) vs Harley-Davidson Harley Davidson Road King Special 114 (2021) vs Triumph Bonneville T120 1959 Legends Custom Edition (2022) vs Borile B 300CR (2016)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Paton | Harley-Davidson | Triumph | Borile |
| Model: | 500 V90 | Harley Davidson Road King Special 114 | Bonneville T120 1959 Legends Custom Edition | B 300CR |
| Years: | 1976-85 | 2021 | 2022 | 2016 |
| Engine: | Four cylinder, 2 stroke, single shaft, 4 valves per cylinder | Four stroke, V-Twin, Milwaukee-Eight 114, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder | Four stoke, parallel twin, 270° crank, SOHC 4 valves per cylinder | Four stroke, single cylinder, SOHC, |
| Capacity: | 492 cc / 30.0 cub in | 1868 cc / 114 cu in | 1198 cc / 73.1 cu in | 292.4 cc / 17.8 cu-in |
| Ignition: | Electronic with variable advance, Dansi | Single-fire, non-wasted, map-controlled spark ignition | Digital | Digital electronic ignition |
| Clutch: | Dry, multiplate | Hydraulically actuated 9 plate wet, Assist & Slip | Wet, multi-plate, torque assist clutch | Multi-plate in oil bath |
| Transmission: | 6 Speed | 6 Speed | 6-Speed | 5-Speed |
| Final Drive: | Chain | Belt | Chain, X-ring | Chain |
| Frame: | Tubular steel chrome-molybdenum | Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded | Tubular steel, twin cradle | Chassis: Light alloy frame 7020 TIG welded. Sottoculla tubular steel 25CrMo4 tig welded. |
| Front Suspension: | Telescopic forks Ceriani R 35 mm | 49 mm forks, Dual Bending Valve | Kayaba 41 mm cartridge forks | Front hydraulic telescopic fork up side down diameter stems 41, with steering plates Alu derived from full. |
| Rear Suspension: | Tubular swingarm with Ceriani R monoshock | Premium low height hand-adjustable rear shocks | Twin RSUs, with pre-load adjustment | Singe shock absorber |
| Front Brakes: | 254 mm Double disc, Fountain | 2 x 300 mm disc, caliper type 32 mm, 4-piston fixed, dual floating rotors | 2 x 310 mm 310mm discs, Brembo 2 piston floating caliper | Single 260 mm disc, 2-piston caliper |
| Rear Brakes: | 254 mm Disc, Fountain | Single 300 mm, caliper type 32 mm, 4-piston, fixed rotor | Single 255mm disc, Nissin 2 piston floating caliper | Single 220 mm disc, 2-piston caliper |