Laverda 250 2TR7 (1976) vs KTM 990 Supermoto T (2013) vs Honda CBF 1000 (2008-09) vs Ducati Hypermotard 939 SP (2016) vs Husqvarna TE 610e (2003-04) vs CCM C-R 40 (2007) vs KTM 640 LC4 Enduro (2003-04) vs Kawasaki Ninja 650 (2012) vs Triumph Sprint ST (2002)

Comparison technical specifications

Add bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike
Make:	Laverda	KTM	Honda	Ducati	Husqvarna	CCM	KTM	Kawasaki	Triumph
Model:	250 2TR7	990 Supermoto T	CBF 1000	Hypermotard 939 SP	TE 610e	C-R 40	640 LC4 Enduro	Ninja 650	Sprint ST
Years:	1976	2013	2008-09	2016	2003-04	2007	2003-04	2012	2002
Engine:	Two stroke, single cylinder	Four stroke, 75°V-twin cylinder, DOHC, 4 valves per cylinder	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Testastretta 11°, L-Twin cylinder, 4 valve per cylinder, Desmodromic	Four stroke, single cylinder, SOHC, 4 valves	Four stroke, single cylinder, DOHC, 4 valve (Suzuki DR-Z400)	Four stroke, single Cylinder. SOHC, 4 valves, engine balancer	Four stroke, parallel twin cylinder. DOHC, 4 valves per cylinder.	Four stroke, transverse three cylinder. DOHC, 4 valves per cylinder
Capacity:	247 cc / 15.2 cu-in	999.8 cc / 60.9 cu-in	998 cc / 60.o cu-in	937 cc / 57.2 cu in	576 cc / 35.2 cu-in	398 cc / 24.3 cu in	624.6 cc / 38.1 cu in	649 cc / 39.65 cu /in	955 cc / 58.3 cu in
Bore x Stroke:	68 x 68 mm	101 x 62.4mm	72 x 56,5 mm	94 x 67.5 mm	98.0 x 76.4 mm	90 x 62.6 mm.	101 x 78 mm	83 x 60 mm	79 x 65 mm
Cooling System:	Air cooled	Liquid cooling,	Liquid cooled	Liquid cooled	Liquid cooled	Liquid cooled	Liquid cooled	Liquid cooled	Liquid cooled
Compression Ratio:	10.0:1	11.5:1	11.0;1	13.1:1	11.0:1	11.3:1	11.5:1	11.3:1	12.0:1
Induction:	32mm Dell'Orto carburetor	Keihin EMS With FPT fuel injection	PGM-FI, 36mm Throttle Bore	Magneti Marelli electronic fuel injection system. Throttle bodies with full Ride by Wire system	41mm Keihin FCR MX	Mikuni BSR36 carburetor	Mikuni BST 40 carburetor	2x Keihin 38mm throttle bodies	Multipoint sequential electronic fuel injection
Max Power:	30 hp @ 7000 rpm	116 hp / 85 kW @ 9000 pm	75 kW /102 hp @ 8000 rpm	83.1 kW / 113 hp @ 9000 rpm	53 hp / 38.3 kW @ 7000 rpm	29.2 kW / 40 hp @ 8500 rpm	40.1 kW / 55 hp @ 7000 rpm	53 kW / 72.1 hp @ 8,500 rpm	87.5 kW / 120 hp @ 9100 rpm
Transmission:	5 Speed	6 Speed	6 Speed	6-Speed	6 Speed	5 Speed	5 Speed	6 Speed	6 Speed
Final Drive:	Chain	Chain 5/8 x 5/16" X Ring	#530 O-ring sealed chain	Chain, front sprocket 15, rear sprocket 43	Chain	Chain	Chain, O-ring 5/8 x 1/4"	O-ring chain	Chain
Front Suspension:	Marzocchi forks	48mm WP USD adjustable	41mm free valve-type telescopic fork and adjustable spring	Öhlins fully adjustable 50mm usd forks	45mm Marzocchi "Upside-Down" telescopic hydraulic fork with advanced axle. compression and rebound stroke adjustment	Paioli Ø40 mm telescopic fork	White Power – Up Side Down 4357 MXMA fork	41 mm hydraulic telescopic fork	45 mm Forks with dual rate springs and adjustable preload
Rear Suspension:	Singling fork with gas shocks	WP shock, fully adjustable	Gas-charged HMAS damper and adjustable spring and rebound	Progressive linkage with fully adjustable Öhlins monoshock. Aluminium single-sided swingarm	Sachs progressive "Soft Damp" type with single hydraulic shock absorber, spring preload adjustment, compression and rebound adjustment	Twin Hagon Ø360 mm fully adjustable shocks	Central shock absorber (WP BAVP3612) with PRO-LEVER linkage to rear- swing-arm with needle bearing	Single offset laydown shock with adjustable spring preload,	Monoshock with adjustable preload, compression and rebound damping
Front Brakes:	180mm Drum	2x 305mm discs 4 piston calipers	2x 296mm discs 2 piston calipers, floating rotors, sintered metal pads ( and ABS)	2 x 320 mm Semi-floating discs, radially mounted Brembo monobloc callipers, 4-piston 2-pad, axial pump with adjustable lever, with Bosch ABS as standard	Single 260mm disc	Single Ø310 mm disc	Single 300 mm disc, 4 piston caliper	2x 300mm discs 2 piston calipers	2 x 320 mm Discs, 4 piston calipers
Rear Brakes:	180mm Drum	Single 240mm disc 2 piston caliper	Single 240mm disc, 1 piston caliper, sintered metal pads (and ABS)	245 mm Disc, 2-piston calliper, with Bosch ABS as standard	Single 220mm disc	Single Ø260 mm disc	Single 220 mm disc, 1 piston caliper	Single 220mm disc	Single 255 mm disc, 2 piston caliper
Front Tyre:	3.00-21	120/70 ZR17	120/70 ZR17	Pirelli Diablo Supercorsa SP 120/70 ZR17	90/90 -21	TT 100 K81	90/90 - 21	120/70 -17	120/70 ZR17
Rear Tyre:	4.00-18	180/55 ZR17	160/60 ZR17	Pirelli Diablo Supercorsa SP 180/55 ZR17	140/80 -18	TT 100 K81	140/80 - 18	160/50 -17	180/55 ZZR17
Fuel Capacity:	9.1 Litres / 2.4 US gal	19 Litres / 5.0 gal	19 Litres / 5.02 US gal	16 Litres / 4.2 US gal / 3.5 Imp gal	9 Litres / 2.4 US gal	14 L / 3.7 US gal	12 L / 3.2 US gal / 2.6 Imp gal	15.5 Litres / 4.1 gal	19.5 Litres / 5.2 US gal / 4.3 Imp gal