KTM 300 EXC TPI (2020) vs BMW HP2 Enduro (2008)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | KTM | BMW |
| Model: | 300 EXC TPI | HP2 Enduro |
| Years: | 2020 | 2008 |
| Engine: | Two stroke, single cylinder, with reed intake and exhaust control | Four stroke, two cylinder horizontally opposed Boxer air/oil-cooled, 4 Valves per cylinder |
| Capacity: | 293.2 cc / 17.9 cu-in | 1170 cc / 71.5 cub. in. |
| Bore x Stroke: | 72 x 72 mm | 101 x 73 mm |
| Lubrication: | Electronically Regulated Oil Pump | Wet sump |
| Cooling System: | Liquid cooled | Oil/air cooled |
| Induction: | TPI, Dell’Orto 39 mm Throttle Body | Fuel Injection ∅47mm Throttle butterfly BMS-K |
| Ignition: | Continental EMS | BMS-K |
| Starting: | Electric | Electric |
| Clutch: | Wet, DDS multi-disc clutch, Brembo hydraulics | Single plate dry clutch, 180 mm diameter |
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | X-Ring 5/8 x 1/4 | Shaft |
| Frame: | Central double-cradle-type 25CrMo4 steel | Steel tubular space frame, non-load-bearing engine |
| Front Suspension: | 48 mm WP XACT-USD | 45mm UPSD Gabe |
| Front Wheel Travel: | 300 mm / 11.8 in | 270 mm / 10.6 in |
| Rear Suspension: | WP XACT Monoshock with linkage | BMW Paralever |
| Rear Wheel Travel: | 310 mm / 12.2 in | 250 mm / 9.8 in |
| Front Brakes: | Single 260 mm disc, 2 piston caliper | 2 x ∅304mm discs, 4 piston caliper |
| Rear Brakes: | Single 220 mm disc, 1 piston caliper | Single 265mm disc 2 piston caliper |
| Front Tyre: | 90/90-21 | 90/90 R21S |
| Rear Tyre: | 110/100-18 | 140/80 R17S |
| Seat Height: | 950 mm / 37.4 in | 920 mm / 36.2 in |
| Dry Weight: | 101.3 kg / 223.3 lbs | 175 kg / 386 lbs |
| Fuel Capacity: | 8.5 Litres / 2.24 US gal | 13 Litres / 3.4 US gal |