KTM 200 Duke / ABS (2020) vs Aprilia Tuareg 600 Wind (1988-89)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | KTM | Aprilia |
| Model: | 200 Duke / ABS | Tuareg 600 Wind |
| Years: | 2020 | 1988-89 |
| Engine: | Four stroke, single cylinder, DOHC, 4 valves per cylinder | Four stroke, single cylinder, SOHC, 4 valves |
| Capacity: | 199.5 cc / 12.2 cu in | 562 cc / 34.3 cu in |
| Bore x Stroke: | 72 x 49 mm | 94 x 81 mm |
| Compression Ratio: | 11.5:1 | 9.4:1 |
| Cooling System: | Liquid cooling system, continuous circulation of cooling liquid with water pump | Air cooled |
| Lubrication: | Pressure circulation lubrication with one rotary pump | Wet sump |
| Induction: | Bosch EFI with 38mm throttle body | Ø35 mm Dell'Orto PHBR35BD carburetor |
| Ignition: | Bosch EMS | Nipponese electronic |
| Max Power: | 19 kW / 26 hp @ 10000 rpm | 34 kW / 46 hp @7100 rpm |
| Max Torque: | 20 Nm / 14.75 lb-ft @ 6800 rpm | 58 Nm / 5.9 kgf-m / 42.8 ft-lb @ 5800 rpm |
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | Chain 520 O-Ring 5/8 x 1/4" | Chain |
| Front Suspension: | Non-adjustable 43mm inverted WP Apex fork | Ø40 mm Telescopic forks |
| Front Wheel Travel: | 117 mm / 4.6 in | 210 mm / 8.3 in |
| Rear Suspension: | Linkage-free, spring-preload adjustable WP Apex shock w/ progressive damping | Monoshock with adjustable preload. |
| Rear Wheel Travel: | 150 mm / 5.0 in | 220 mm / 8.7 in |
| Front Brakes: | Single 300 mm disc, radially mounted ByBre four-piston caliper | Single Ø300 mm disc, 2 piston caliper |
| Rear Brakes: | Single 230 mm disc, floating ByBre caliper | Single Ø220 mm disc |
| Front Tyre: | 110/70 - R17 M/C 54S TL | 90/90-21 |
| Rear Tyre: | 150/60 - R17 M/C 66S TL | 130/80-18 |
| Seat Height: | 805 mm / 31.6 in | 910 mm / 35.8 in |
| Dry Weight: | 132 kg / 330 lbs | 148 kg / 326 lbs |
| Fuel Capacity: | 13.4 Litres / 3.5 US gal | 18.4 Litres / 4.9 US gal |