KTM 200 Duke / ABS (2018-19) vs Harley-Davidson Harley Davidson Limited (2020-21)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | KTM | Harley-Davidson |
| Model: | 200 Duke / ABS | Harley Davidson Limited |
| Years: | 2018-19 | 2020-21 |
| Engine: | Four stroke, single cylinder, DOHC, 4 valves per cylinder | Four stroke, V-Twin, Milwaukee-Eight 114, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder |
| Capacity: | 199.5 cc / 12.2 cu in | 1868 cc / 114 cu in |
| Bore x Stroke: | 72 x 49 mm | 102 x 114 mm |
| Compression Ratio: | 11.5:1 | 10.5:1 |
| Cooling System: | Liquid cooling system, continuous circulation of cooling liquid with water pump | Air cooled |
| Lubrication: | Pressure circulation lubrication with one rotary pump | Pressurized, dry-sump with oil cooler |
| Exhaust: | Stainless steel silencer with regulated catalytic converter | Chrome dual exhaust with 4 in. touring mufflers and touring muffler shields |
| Induction: | Bosch EFI with 38mm throttle body | Electronic Sequential Port Fuel Injection (ESPFI) |
| Ignition: | Bosch EMS | Single-fire, non-wasted, map-controlled spark ignition |
| Max Torque: | 20 Nm / 14.75 lb-ft @ 6800 rpm | 167 Nm / 122 lb-ft @ 3250 rpm |
| Clutch: | Wet multi-disc clutch, mechanically operated | Hydraulically actuated, 9 plate wet, with high performance spring |
| Transmission: | 6 Speed | 6 Speed Cruise Drive® |
| Final Drive: | Chain 520 O-Ring 5/8 x 1/4" | Belt, 32/68 ratio |
| Frame: | Powdercoated steel trellis w/ bolt-on rear subframe | Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded |
| Front Suspension: | Non-adjustable 43mm inverted WP Apex fork | 41.3 mm telescopic, triple circuit damping |
| Rear Suspension: | Linkage-free, spring-preload adjustable WP Apex shock w/ progressive damping | Low air-adjustable low profile air ride rear suspension |
| Front Brakes: | Single 300 mm disc, radially mounted ByBre four-piston caliper | 2x 300mm discs 4 piston calipers |
| Rear Brakes: | Single 230 mm disc, floating ByBre caliper | Single 300mm discs 4 piston caliper |
| Wheels: | Cast aluminum | Optional Style Type Gloss Black Slicer II |
| Front Wheel: | 17 x 3.00 | Slicer II cast aluminum with clear coat |
| Rear Wheel: | 17 x 4.00 | Slicer II cast aluminum with clear coat |
| Front Tyre: | 110/70 - R17 M/C 54S TL | BW 130/70B18 63H |
| Rear Tyre: | 150/60 - R17 M/C 66S TL | BW 180/55B18 80H |
| Trail: | 100 mm / 3.9 in | 170 mm / 6.6 in |
| Wheelbase: | 1357 mm ± 15.5 mm / 53.4 ± 0.6 in | 1625 mm / 64 in |
| Ground Clearance: | 140 mm / 5.5 in | 130 mm / 5.1 in |
| Seat Height: | 805 mm / 31.6 in | 735 mm / 28.9 in |
| Dry Weight: | 132 kg / 330 lbs | 407 kg / 897 lbs |
| Fuel Capacity: | 13.4 Litres / 3.5 US gal | 22.7 Litres / 6.0 US gal |