Junak WB1/WB3 (1959-65) vs Maico Enduro 250 (2014)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Junak | Maico |
| Model: | WB1/WB3 | Enduro 250 |
| Years: | 1959-65 | 2014 |
| Engine: | Four stroke, single cylinder, OHV | Single cylinder, two stroke |
| Capacity: | 349 cc / 21.3 cub. in. | 247 cc / 15.1 cub in |
| Bore x Stroke: | 75 x 79 mm | 67 x 70 mm |
| Compression Ratio: | 7.0:1 | 15.5:1 |
| Ignition: | Magneto | 12V 130W SEM |
| Starting: | Kick-start | Kick |
| Clutch: | Multi-plate clutch with cork inserts working in an oil bath | Wet, cable operated |
| Max Power: | 14 kW / 19 hp @ 6000 rpm | 40.3 kW / 54 hp @ 5400 rpm |
| Transmission: | Four-speed constant-mesh | 5-Speed |
| Final Drive: | Chain | Chain |
| Frame: | Double, cradle-type, welded throughout of tubing, provided with holders for side car mounting. | Chrom Molybdän Rohr |
| Front Suspension: | Fork with coil springs telescopic shock absorbers | White Power Extreme 50 |
| Rear Suspension: | Independent rear wheel suspension on single wishbone , cooperating with 7- leaf spring positioned transversely; | MAICO Twin link WP |
| Front Brakes: | Full hub width, of expander shoe type, hand operated | Single disc, 260 mm, 2-piston caliper, Brembo |
| Rear Brakes: | Full hub width, of expander shoe type, foot operated | Single disc, 220 mm , 1-piston caliper, Brembo |
| Wheels: | Wire type, with full width hubs made of light alloy, interchangeable (also with side-car wheel). Both wheels with quick-detachable spindles | Alloy, wire spokes |
| Front Tyre: | 19 in | 90/90-21 |
| Rear Tyre: | 12 in | 140/80-18 |
| Front Rim: | 89 mm / 3.5 in | 1.60 x 21 in. |
| Rear Rim: | 89 mm / 3.5 in | 2.15 x 18 in. |
| Seat Height: | 755 mm / 29.7 in | 960 mm / 37.8 in. |
| Ground Clearance: | 170 mm / 6.7 in | 388 mm / 15.3 in. |
| Fuel Capacity: | 17 l / 3.9 US gal | 9.5 L / 2.5 US gal |
| Source: | Article by T. Tomaszewski in „Świat motocykli” 2003. | Off-road.com |