Husqvarna TE 300i Rockstar Edition (2022) vs Honda NT 700V Deauville (2006-07) vs Hartford VR 200X () vs Honda MSX 125 Grom / ABS (2019-20) vs Yamaha XT 250 (2020) vs KYMCO Kymco Like 200i (2015) vs Sherco 4.5i Enduro (2010-) vs Triumph TR7T Tiger Trail (1980) vs Ariel KH 500 Fieldmaster (1948-57) vs Honda NT 650V Deauville (2004-05)

Comparison technical specifications

Add bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike
Make:	Husqvarna	Honda	Hartford	Honda	Yamaha	KYMCO	Sherco	Triumph	Ariel	Honda
Model:	TE 300i Rockstar Edition	NT 700V Deauville	VR 200X	MSX 125 Grom / ABS	XT 250	Kymco Like 200i	4.5i Enduro	TR7T Tiger Trail	KH 500 Fieldmaster	NT 650V Deauville
Years:	2022	2006-07		2019-20	2020	2015	2010-	1980	1948-57	2004-05
Engine:	Two stroke, single cylinder with reed intake and exhaust control	Four stroke, 52°V-Twin, SOHC. 4 valve per cylinder	Four stroke, single cylinder, OHV. 2 valves per cylinder	Four stroke, single cylinder, SOHC, 2 valve	Four stroke, single cylinder. SOHC, 2 valve	Four stroke, single cylinder, SOHC	Four stroke, single cylinder, SOHC, 4 valve	Four stroke, parallel twin cylinder, OHV	Four stroke, stroke, twin	Four stroke, 52°V-Twin cylinder, SOHC, 3 valve per cylinder
Capacity:	293.2 cc / 17.8 cu-in	680 cc / 41.5 cu-in	197 cc / 12.02 cu in	124.9 cc / 7.62 cu-in	249 cc / 15.2 cu-in	163 cc / 9.9 cub in	448.6 cc / 27.3 cu-in	744 cc / 45.4 cu in	498 cc / 30.4 cu in	647 cc / 39.4 cu-in
Bore x Stroke:	72 x 72 mm	81 x 66 mm	63.5 x 62.2 mm	52.4 x 57.9 mm	74.0 x 58.0mm	60 x 57.8 mm	94,5 x 64 mm	76 x 82 mm	56 x 86 mm	79 x 66 mm
Cooling System:	Liquid cooled	Liquid cooled	Air cooled	Air cooled	Air cooled	Forced air cooling	Liquid cooled	Air cooled	Air cooled	Liquid cooled
Induction:	Dell’ Orto EFI with 39mm throttle body	PGM-FI electronic fuel injection	Carburettor	Injection PGM-FI	Mikuni 33mm throttle body fuel injection	EFI	Electronic fuel injection/digital engine management: Magneti Marelli Injection	Amal Mkl, 30mm slide type carburetor	Carburetor	2x36mm equal pressure flat slide carburetors
Starting:	Electric	Electric	Electronic	Electric	Electric	Electric	Electric	Kick	Kick	Electric
Max Power:	NA	65 hp / 38.3 kW @ 8000 rpm	19.1 hp / 14.1 kW) @ 7500 rpm	9.6 hp / 7.1 kW @ 7000 rpm	18 hp / 13.1 kW @ 7500 rpm	8.2 kW / 11.3 hp @ 7250 rpm	NA	28.9 kW / 38.7 hp @ 6500	20.9 kW / 28 hp @ 6500 rpm	56.1 hp / 40.9 kW @ 7897 rpm
Transmission:	6 Speed	5 Speed	5 Speed	4 Speed	5 Speed	CVT	6 Speed	5 Speed	Bruman 4-speed	5 Speed
Final Drive:	ChainX-Ring 5/8 x 1/4 in	Shaft	Chain	Chain	“O” ring chain	Belt	Chain	Chain	Chain	Shaft
Front Suspension:	48mm Fully adjustable WP Xplor inverted fork	41 mm telescopic fork	Telescopic forks	31mm inverted fork	35mm Telescopic forks	Telescopic fork	Ø46 mm Paioli/Kayaba telescopic fork. Forward offset wheel axle and brake calliper	Telescopic forks with coil springs and oil damping	Telescopic forks	Telescopic forks
Rear Suspension:	Linkage-assisted fully adjustable WP Xact shock	Single damper with adjustable preload	Single shock	Mono shock with steel box-section swingarm	Monocross, Swingarm rebound-adjustable single shock	Twin swingarm, dual shock	Progressive system with single Paioli absorber with aluminium structure and fully adjustable (four regulation types), linked to the centre of the chassis and pushed by the swing arm through an articulated rod system	Swinging fork controlled by twin Marzocchi units. Five spring pre-load settings and gas/oi damping	Rigid, spring loaded saddle (as from 1957: swinging arm)	Pro-link monoshock
Wheelbase:	1482±10 mm / 58.5 in	1476 mm / 58.1 lbs	1375 mm / 54.1 in	1200 mm / 47.2 in	1359 mm / 53.5 in	1318 mm / 51.9 in	1485 mm / 58.5 in	1422 mm / 56 in.	1422 mm / 56 in	1473 mm / 58.0 in
Fuel Capacity:	8.310 Litres / 2.2 US gal	19.5 Litres / 5.2 US gal	12 Litres / 3.1 US gal	5.5 Litres / 1.45 US gal	9.6 Litres / 2.5 US gal	6.8 L / 1.8 US gal	8.5 Litres / 2.2 US gal	10.5 L / 2.8 US gal / 2.3 Imp gal	17 L / 4.5 US gal	19.5 Litres