Honda Rebel 500 (2020) vs Suzuki RM250 Paul Edmondson Replica (2007) vs Husqvarna TE 410 (1996-99)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Honda | Suzuki | Husqvarna |
| Model: | Rebel 500 | RM250 Paul Edmondson Replica | TE 410 |
| Years: | 2020 | 2007 | 1996-99 |
| Engine: | Four stroke, parallel-twin cylinder, DOHC; 4 valves per cylinder | Two stroke, single cylinder | Four stroke, single cylinder, SOHC, 4 valve |
| Capacity: | 471 cc / 28.7 cu-in | 249 cc / 15.2 cu in | 399 cc / 24.3 cu-in |
| Bore x Stroke: | 67 x 66.8mm | 66.4 x 72.0 mm | 91.5 x 60.8 mm |
| Cooling System: | Liquid-cooled | Liquid cooled | Liquid cooled |
| Compression Ratio: | 10.7:1 | 10.7:1 (ex valve closed), 8.9:1 (ex valve open) | 11.4:1 |
| Induction: | PGM-FI | Keihin PWK38PWJ/TPS | 36mm Dell’Orto carburetor |
| Ignition: | Computer-controlled digital transistorized w/ electronic advance | Electronic CDI | Digital CDI |
| Starting: | Electric | Kick | Kick |
| Transmission: | 6 Speed | 5 Speed | 6 Speed |
| Final Drive: | #520 chain; 15T/40T | Chain | Chain |
| Front Suspension: | 41mm Telescopic fork | Kayaba inverted cartridge, 18 step rebound, 20-step compression damping adjustable | Telescopic forks, 305mm wheel travel. |
| Rear Suspension: | Dual shocks with five-position spring preload adjustment | Kayaba link-type, 18-step rebound, 3-turn high, 16-step low speed compression damping, preload adjustable | Monoshock, 320mm wheel travel |
| Front Brakes: | Single 296mm hydraulic disc with two piston caliper | Single 250 mm disc, 2 piston caliper | Single 260mm disc |
| Rear Brakes: | Single 240mm hydraulic disc with single piston caliper | Single 240mm disc, 1 piston caliper | Single 220mm disc |
| Front Tyre: | 130/90-16 | 100/90 -21 | 90/90 -21 |
| Rear Tyre: | 150/80-16 | 110/90 -18 | 140/80 -18 |
| Fuel Capacity: | 11.4 Litres / 2.9 US gal | 8.0 litres / 2.1 US gal / 1.8 Imp gal | 9.1 Litres / 2.4 US gal |