Honda Rebel 500 (2020) vs Husqvarna TE 410 (1996-99) vs Kawasaki AR 125 (1986-88) vs Kawasaki Z 305CSR (1981) vs Aprilia RS 250 (1997) vs Yamaha V-Max (1995-98) vs Kawasaki KX 500 (1987) vs Moto Guzzi V7 Special (2013) vs Ducati 750 F1 Santamonica (1988)

Comparison technical specifications

Add bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike
Make:	Honda	Husqvarna	Kawasaki	Kawasaki	Aprilia	Yamaha	Kawasaki	Moto Guzzi	Ducati
Model:	Rebel 500	TE 410	AR 125	Z 305CSR	RS 250	V-Max	KX 500	V7 Special	750 F1 Santamonica
Years:	2020	1996-99	1986-88	1981	1997	1995-98	1987	2013	1988
Engine:	Four stroke, parallel-twin cylinder, DOHC; 4 valves per cylinder	Four stroke, single cylinder, SOHC, 4 valve	Two stroke, single cylinder, disc valve.	Four stroke, parallel twin, SOHC, 2 Valve per cylinder.	Two stroke, 90° V twin-cylinder, with laminar suction and exhaust valve. Separate lubrication with variable automatic mixer	Four stroke, V-four, DOHC, 4 valve per cylinder.	Two stroke, single cylinder, read valve	Four stroke, V twin, longitudinally mounted, OHV, 2 valves per cylinder.	Four stroke, 90°“L”twin cylinder, SOHC, desmodromic 2 valves per cylinder, belt driven
Capacity:	471 cc / 28.7 cu-in	399 cc / 24.3 cu-in	124 cc / 7.5 cu-in	305 cc / 18.6 cu-in	249 cc / 15.2 cu in	1198 cc / 73.1 cu-in	499 cc / 30.5 cu-in	744 cc / 45.4 in	748 cc / 45.6 cu in
Bore x Stroke:	67 x 66.8mm	91.5 x 60.8 mm	55 х 51.8 mm	61.0 x 52.4 mm	56 x 50.6 mm	76 х 66 mm	86 x 86mm	80 x 74 mm	88 x 61.5 mm
Compression Ratio:	10.7:1	11.4:1	6.5:1	9.7:1	12.0:1 (+/- 0.7)	10.5:1	8.4:1	9.6:1	10.0:1
Induction:	PGM-FI	36mm Dell’Orto carburetor	24mm Mikuni carburetor	2x 32mm Mikuni carburetor	2 x Ø34 mm Mikuni 34 SS flat side carburetors	4x 35mm Mikuni BDS35 carburetor	Mikuni VM3$SSwkhova1 bore and R-Slkk carburetor	Weber- Marelli electronic injection	2 x 36 mm Dell'Orto PH 40N carburetors
Ignition:	Computer-controlled digital transistorized w/ electronic advance	Digital CDI	Capacitor discharge	Breaker point	CDI	CDI	CDI	Magneti Marelli electronic digital	Kokusan electronic
Starting:	Electric	Kick	Kick	Electric	Kick	Electric	Kick	Electric	Electric
Max Power:	NA	34 hp / 24.8 kW @ 7000 rpm	22 hp / 16.4 kW @ 9500 rpm	30 hp / 22.3 kW @ 9000 rpm	52.9 kW / 72.5 hp @ 11900 rpm	102 hp / 74.4 kW @ 8000 rpm	63,5 hp / 46,7 kW @ 7000 rpm	37.5 kW / 51 hp @ 6200 rpm	69.9 kW / 95 hp @ 10000 rpm
Max Torque:	NA	40.6 Nm / 30 lb-ft @ 5150 rpm	1.7 kgf-m / 12.2 lb-ft @ 8000 rpm	2.5 kg-m / 18.0 lb-ft @ 7000 rpm	40 Nm / 4.08 kgf-m / 29.5 lb/ft @ 10750 rpm	114.7 Nm / 86.4 lb-ft @ 6000 rpm	65,7 Nm 48.4 lb-ft / @ 6000 rpm	58 Nm / 40.3 lb-ft @ 5000 rpm	70.6 Nm / 7.2 kgf-m / 52.1 ft-lb @ 7000 rpm
Transmission:	6 Speed	6 Speed	6 Speed	6 Speed	6 Speed, direct drive	5 Speed	5 Speed	5 Speed	5 Speed
Final Drive:	#520 chain; 15T/40T	Chain	Chain	Belt	Chain, sealed, jointless, DID 520 V6	Shaft	Chain	Shaft, ratio 4.825	Chain
Front Suspension:	41mm Telescopic fork	Telescopic forks, 305mm wheel travel.	30mm Leading telescopic	Telescopic forks	Ø40 mm Inverted fork with adjustable rebound and compression damping.	40mm Kayaba forks, Air pressure	Leading-axle, 43mm air-assisted forks with adjustable compression damping	Marzocchi Ø 40 mm telescopic front forks	40 mm Forcella Italia fork
Rear Suspension:	Dual shocks with five-position spring preload adjustment	Monoshock, 320mm wheel travel	Rising rate Uni-trek linkage 5-way preload.	Swing arm	Magnesium alloy swingarm. Monoshock with resevoir, adjustable extension, compression and spring preloading.	Dual Kayaba shocks, adjustable for preload damping.	Uni Trak, damping-ad	Swinging arm in light cast alloy with two dampers and adjustable preload	Round section chrome-moly steel swingarm with adjustable (for preload) cantilever mono-shock, Marzocchi PVS 4
Front Brakes:	Single 296mm hydraulic disc with two piston caliper	Single 260mm disc	Single 232mm disc 1 piston caliper	Single 255mm disc	2 x Ø298 mm discs, 4 piston calipers	2x 298mm discs 2 piston calipers	Single 220mm disc	Single 320mm disc 2 piston caliper	2 x 280 mm Discs, 4 piston calipers Brembo P3432D "Gold Series"
Rear Brakes:	Single 240mm hydraulic disc with single piston caliper	Single 220mm disc	130 drum	Drum	Single Ø220 mm disc, 2 piston caliper	Single 282mm disc 2 piston caliper	Single 190mm disc	Single 260mm disc 2 piston caliper	Single 270 mm disc
Front Tyre:	130/90-16	90/90 -21	2.75-18	3.00 -18	110/70-17	110/90-18	3.00 -21	100/70-18	130/60 V16
Rear Tyre:	150/80-16	140/80 -18	3.00-18	120/90-16	150/60-17	150/90-15	110/100 18	130/80-17	160/60 V16
Fuel Capacity:	11.4 Litres / 2.9 US gal	9.1 Litres / 2.4 US gal	11.5 Litres / 3.0 US gal	16.5 Litres / 4.3 US gal	16.5 Litres / 4.4 US gal	15 Litres / 3.9 US gal	9 Litres / 2.4 US gal	22 Litres / 5.8 gal	18 L / 4.8 US gal / 4.0 Imp gal