Moto-Data

Honda Monkey 125 ABS (2018-19) vs Beta RR 250 Enduro (2007-10)

Comparison technical specifications


Add bike
2018 Honda Monkey 125 ABS
Remove bike
2007 Beta RR 250 Enduro
Remove bike
Make: Honda Beta
Model: Monkey 125 ABS RR 250 Enduro
Years: 2018-19 2007-10
Engine: Four stroke, single cylinder, SOHC, 2 valve Four stroke, single cylinder, DOHC, 4 valves
Capacity: 124.9 cc / 7.62 cu-in 250 cc / 15.3 cu in
Bore x Stroke: 52.4 x 57.9 mm 75 x 56.5 mm
Compression Ratio: 9.3:1 12.0:1
Cooling System: Aircooled Air cooled
Induction: PGMFI electronic fuel injection Keihin FCR-MX 37 carburetor
Ignition: Electronic CDI DC-CDI without trembler with variable ignition timing, Kokusan type
Starting: Electric Electric and kick start
Clutch: Wet multiplate Wet, multiplate
Transmission: 4 Speed 6 Speed
Final Drive: Chain Chain
Frame: Steel mono-backbone frame Molybdenum steel with double cradle split above the exhaust port
Front Suspension: Upside down telescopic forks Marzocchi hydraulic USD fork, 45 mm Ø
Front Wheel Travel: 100 mm / 3.9 in 290 mm / 11.4 in
Rear Suspension: Dual shocks Monoshock with progressive compound lever
Rear Wheel Travel: 104 mm / 4.1 in 300 mm / 11.8 in
Front Brakes: Single 220 mm hydraulic disc with IMU-based ABS Single 255 mm Ø disc, 2 floating piston calipers
Rear Brakes: Single 190 mm hydraulic disc Single 240 mm Ø disc, 1 floating piston caliper
Front Wheel: 10 Spoke cast aluminium 1.60 x 21
Rear Wheel: 10 Spoke cast aluminium 2.15 x 18
Front Tyre: 120/80-12 65J 90/90 -21
Rear Tyre: 130/80-12 69J 140/80 -18
Rake: 25.0° 26.5°
Trail: 82 mm / 3.2 in 108.5 mm / 4.3 in
Dimensions: Length 1710 mm / 67.3 in Width 755 mm / 29.7 in Height 1029 mm / 40.5 in Length: 2270 mm / 89.4 in Width: 813 mm / 32.0 in Height: 1255 mm / 49.4 in
Wheelbase: 1155 mm / 45.4 in 1490 mm / 58.7 in
Seat Height: 776 mm / 30.5 in 940 mm / 37 in
Ground Clearance: 160 mm / 6.3 in 320 mm / 12.6 in
Fuel Capacity: 5.6 Litres / 1.45 US gal 8.5 L / 2.2 US gal