Honda CRF 450X (2007-08) vs Honda CM 400T (1979) vs Honda CX 500 Custom (1979-80) vs Honda GLX 1800 Gold Wing Tour / DCT / Airbag DCT (2018) vs Honda CRF 1000L Africa Twin / DCT (2018) vs Honda VFR 800F V-Tec (2003) vs Honda CM 400T (1981-82) vs LIFAN Lifan LF 150-27 (2006) vs Honda CM 250T (1981) vs Aprilia RS 125 R osso Fluo (2008)

Comparison technical specifications

Add bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike
Make:	Honda	Honda	Honda	Honda	Honda	Honda	Honda	LIFAN	Honda	Aprilia
Model:	CRF 450X	CM 400T	CX 500 Custom	GLX 1800 Gold Wing Tour / DCT / Airbag DCT	CRF 1000L Africa Twin / DCT	VFR 800F V-Tec	CM 400T	Lifan LF 150-27	CM 250T	RS 125 R osso Fluo
Years:	2007-08	1979	1979-80	2018	2018	2003	1981-82	2006	1981	2008
Engine:	Four stroke, single cylinder, DOHC, 4 valves	Four stroke, parallel twin, OHC, 3 valve per cylinder	Four stroke, longitudinal 800 V-twin cylinder, camshaft nestles at the base of the V between the cylinders. ,OHV, 4 valves per cylinder operated by pushrods	Four stroke, opposed boxer six cylinders, SOHC, 4-valve per cylinder, finger-follower rocker arm on intake, roller-rocker arm on exhaust	Four stroke, parallel Twin with 270° crank, SOHC, 4 valves per cylinder	Four stroke, 90°V-four cylinder, DOHC, 4 valve per cylinder.	Four stroke, parallel twin, OHC, 3 valve per cylinder	Four stroke, single cylinder,	Four stroke, parallel twin, OHC, 2 valve per cylinder	Single cylinder, two stroke, reed valves induction
Capacity:	449 cc / 27.4 cu-in	395 cc / 24.1 cu-in	497 cc / 30.3 cu-in	1833 cc / 111.85 cub in.	998 cc / 60.9 cu-in	781.7 cc / 47.4 cu-in	395 cc / 24.1 cu-in	124 cc / 7.6 cu-in	234	124.8 cc / 7.5 cu in
Bore x Stroke:	96 x 62mm	70.5 x 50.6 mm	78 x 52 mm	73 x 73 mm	92.0 x 75.1 mm	72 x 48 mm	70.5 x 50.6 mm	56.5 x 49.5 mm	53.0 x 53.0 mm	54 x 54.5mm
Compression Ratio:	12.0:1	9.3:1	10.0:1	10.5:1	10.0:1	11.6 1	9.3:1		9.4:1	12.5:1
Induction:	Keihin 40mm flat-slide	2x 32mm Keihin carburetors	2x 34mm Keihin carbs.	EFI, 50mm throttle body	Fuel injection	PGM-FI electronic fuel injection	2x 32mm Keihin carb.	Carburettor		Dell'Orto PHBH 28 carburetor
Max Power:	44.8 hp / 33 kW @ 7500 rpm		50 hp / 37.2 kW @ 9000 rpm	118 hp / 86.1 kW) @ 5500 rpm	93.8 hp / 70 kW @ 7500 rpm	110 hp / 81 kW @ 10500 rpm		8.2 kW @ 9000 rpm	17 hp @ 7500 rpm	21 kW / 28 hp @ 10500 rpm
Max Torque:	43 Nm / 4.38 kg-m @ 7000 rpm		46 Nm / 33.9 lb-ft @ 7000 rpm	167 Nm / 123.2 ft-lb @ 4000 rpm	98 Nm / 72.2 ft-lb @ 6000 rpm	82 Nm / 60.5 lb-ft @ 8500 rpm		8.5 Nm @ 7500 rpm		19 Nm / 1.9 kgf-m / 14.1 lb-ft @ 9000 rpm
Transmission:	5 Speed	5 Speed	5 Speed	6-speed manual or 7-speed automatic DCT w/ Walking Mode F/R	Constant mesh 6-speed manual / 6-speed automatic DCT with on- and off-road riding modes	6 Speed	5 Speed	5 Speed	4 Speed	6 Speed
Final Drive:	#520 chain; 14T/40T	Chain	Shaft	Shaft	O-ring sealed chain	#530 O-ring-sealed chain	Chain	Chain	Chain	17:40
Front Suspension:	Inverted fully adjustable 47mm Showa cartridge forks, 16-way rebound settings, 16-way compression	Telehydraulic forks	33mm Showa telehydraulic fork	Double-wishbone	Showa 45mm cartridge-type inverted telescopic fork with hydraulic dial-style preload adjuster and DF adjustment, 204mm axle stroke	41mm H.M.A.S. cartridge-type telescopic fork with preload adjustable damper,	Telehydraulic forks	Telescopic fork	31mm Forks, centre axle fork	Upside-down forks, Ø 40mm
Rear Suspension:	Pro Link Showa single shock with 312mm of travel 17-way rebound settings, 13 low speed compression settings and 3.5 turns of high speed compression adjustment)	Swingarm fork with adjustable telehydraulic shocks.	Swinging arm fork with adjustable shocks absorbers	Pro-Link system w/ Showa shock absorber	Monoblock cast aluminium swing arm with Pro-Link with gas-charged damper, hydraulic dial-style preload adjuster and rebound damping adjustment, 94 mm axle stroke	Pro arm mono arm system incorporating stepless rebound-adjustable gas-charged H.M.A.S. damper with pro-link,	Swingarm fork with adjustable telehydraulic shocks	Swinging arm	Dual shocks adjustable spring preload	Monoshock, cast aluminium box section swingarm with asymmetric members
Front Brakes:	Single 240mm disc 2 piston caliper	Single disc	2x 275mm discs	2x 320mm discs 6-piston Nissin calipers	2x 310 mm floating hydraulic discs with aluminum hub and radial fit 4-piston calipers and sintered metal pads	2x 296mm discs 3 piston calipers	Single disc	Single disc	Single disc	Single 320 mm floating discs, 4 piston radial caliper
Rear Brakes:	Single 240mm disc	Drum	160mm Drum	Single 316mm disc 3-piston Nissin caliper	Single 256mm wave hydraulic disc with 2-piston caliper and sintered metal pads. Also Lever-Lock Type Parking Brake System on DCT/ABS model	Single 256mm disc 3 piston caliper	Drum	Drum	Drum	Single 220 mm disc, 2 piston caliper
Front Tyre:	80/100-21	3.50-18	3.50-19	130/7018	90/90-R21 tube type	120/70 ZR17	3.50-18	2.75-18	3.25-18	110/70-17
Rear Tyre:	110/100-18	4.60-16	130/90-16	200/55-R16	150/70-R18 tube type	180/55 ZR17	4.60-16	3.00-18	110/90-16	150/60-17
Fuel Capacity:	7.2 Litres / 1.9 gal	9.5 Litres / 2.5 US gal	12.5 Litres / 3.3 US gal	20.8 Litres / 5.5 US gal	18.7 Litres / 4.96 US gal	20.8 Litres / 5.5 gal	9.5 Litres / 2.5 US gal	15 Litres	12.5 Litres	14 Litres / 3.7 US gal