Honda CBR 500R (2022) vs Indian FTR1200 (2021) vs Yamaha MT-07 LA Learner Approved (2021) vs Moto Guzzi V7 Clubman Racer Special Edition (2013)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Honda | Indian | Yamaha | Moto Guzzi |
| Model: | CBR 500R | FTR1200 | MT-07 LA Learner Approved | V7 Clubman Racer Special Edition |
| Years: | 2022 | 2021 | 2021 | 2013 |
| Engine: | Four stroke, parallel-twin, DOHC, 4 valves per cylinder | Four stroke, 60° V Twin , DOHC, 4 valves per cylinder, graded buckets | Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder | Four stroke, V twin, longitudinally mounted, OHV, 2 valves per cylinder. |
| Capacity: | 471 cc / 28.7 cu-in | 1203 cc / 73 cu-in | 655 cc / 40.04 cu-in | 744 cc / 45.4 cu-in |
| Bore x Stroke: | 67.0 x 66.8 mm | 102 x 73.6 mm | 78.0 x 68.6 mm | 80 x 74 mm |
| Compression Ratio: | 10.7:1 | 12.5:1 | 11.0:1 | 9.6:1 |
| Cooling System: | Liquid cooled | Liquid Cooled | Liquid cooled | Air cooled |
| Induction: | PGM-FI with 34mm throttle bodies | Electronic Fuel Injection closed loop, 60 mm bore | Fuel Injection | Weber- Marelli electronic injection |
| Starting: | Electric | Electric | Electric | Electric |
| Max Power: | 46.9 hp / 35 kW @ 8600 rpm | 120 hp / 89.4 kW @ 6000 rpm | 52.1hp / 38.3 kW @ 8000 rpm | 48 hp / 35 kW @ 6200 rpm |
| Max Torque: | 43 Nm / 31.7 lb-ft @ 6500 rpm | 117.9 Nm / 87 lb-ft @ 6000 rpm | 57.5 Nm / 42.5 lb-ft @ 4000 rpm | 58 Nm / 40.3 lb-ft @ 5000 rpm |
| Clutch: | Wet multiplate, Assisted slipper clutch | Assist & Slip, Multi-Plate | Wet multiplate | Single disc, dry, with cush drive |
| Transmission: | 6 Speed | 6 Speed | 6 speed, constant mesh | 5 Speed |
| Final Drive: | O-ring-sealed chain | Chain | Chain | Shaft, ratio 4.825 |
| Frame: | Steel diamond | Steel trellis | Diamond | Detachable tubular duplex cradle |
| Front Suspension: | 41mm Showa SFF-BP Inverted fork, pre-load adjustable | 43 mm ZF Sachs fully adjustable inverted telescopic cartidge fork | 41mm Telescopic forks | Marzocchi Ø 40 mm telescopic front forks |
| Front Wheel Travel: | 109 mm / 4.3 in | 120 mm / 4.7 in | 130 mm / 5.1 in | 130 mm / 5.1 in |
| Rear Suspension: | Prolink mono with 5 stage pre-load adjuster, Steel hollow cross swingarm | ZF Sachs fully adjustable piggyback IFP | Single shock, adjustable preload and rebound damping | Swinging arm in light cast alloy with two dampers and adjustable preload |
| Rear Wheel Travel: | 120 mm / 4.7 in | 120 mm / 4.7 in | 130 mm / 5.1 in | 118 mm / 4.6 in |
| Front Brakes: | 2x 296mm wave disc with Nissin radial-mount two piston calipers | 2x 320mm t5 Rotor Brembo with 4-piston calipers | 2x 298mm discs, 4-piston calipers | Single 320mm discs 4 piston calipers |
| Rear Brakes: | Single 240mm wave disc 1 piston calipers | Single 260mm t5 Rotor Brembo with 2-piston calipers | Single 245mm disc, single piston caliper | Single 260mm disc 1 piston caliper |
| Front Tyre: | 120/70ZR17M/C (58W) | 120/70ZR17 58W Metzeler Sportec | 120/70 ZR17 | 100/90/18 |
| Rear Tyre: | 160/60ZR17M/C (69W) | 180/55ZR17 73W Metzeler Sportec | 180/55 ZR17 | 130/80 17 |
| Trail: | 102 mm / in | 99.9 mm / 3.9 in | 90 mm | 109 mm / 4.29 in |
| Dimensions: | Length: 2080 mm / 81.8 in Width: 760 mm / 29.9 in Height: 1145 mm / 45 in | Length 2223 mm / 87.5 in Width 830 mm / 32.7 in Height 1297 mm / 51.1 in | Length 2085 mm / 82.1 in Width 780 mm / 30.7 in Height 1105 mm / 43.5 in | Length 2185 mm / 86 in Width 800 mm / 31.8 in Height 1115 mm / 43.8 in |
| Wheelbase: | 1410 mm / 55.5 in | 1524 mm / 60 in | 1400 mm / 55.1 in | 1449 mm / 57.0 in |
| Seat Height: | 785 mm / 30.9 in | 840 mm / 33.1 in | 805 mm / 31.7 in | 805 mm / 31.7 in (780 mm / 30.7 in) |
| Ground Clearance: | 130 mm / 5.1 in | 170 mm / 6.5 in | 140 mm / 5.5 in | 182 mm / 7.2 in |
| Fuel Capacity: | 17.1 Litres / 4.4 US gal | 12.9 Litres / 3.4 US gal | 14 Litres / 3.7 US gal | 17 Litres / 4.5 gal |