Honda CBF 250 (2010-12) vs Ducati 1000SS DS (2004)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | Ducati |
| Model: | CBF 250 | 1000SS DS |
| Years: | 2010-12 | 2004 |
| Engine: | Four stroke, single cylinder, DOHC, 4 valve per cylinder. | Four stroke, 90°“L”twin cylinder, SOHC, desmodromic 2 valves per cylinder, belt driven |
| Capacity: | 249 cc / 15.2 cu-in | 992 cc / 60.5 cu in |
| Cooling System: | Air cooled | Air cooled |
| Bore x Stroke: | 73 x 59.5 mm | 94 x 71.5 mm |
| Compression Ratio: | 9.3:1 | 10.0:1 |
| Induction: | 32mm VE-L type carburetor | Marelli CPU 5.9M fuel Injection, 45 mm throttle body |
| Ignition: | Digital transistorized | Marelli electronic |
| Starting: | Electric | Electric |
| Max Power: | 15 kW / 21.4 kW @ 8000 rpm | 63 kW / 85.5 hp @ 7750 rpm |
| Max Torque: | 22 Nm / 16.2 lb-ft @ 6000 rpm | 87.5 Nm / 9 kgf-m / 64.5 lb-ft @ 5750 rpm |
| Clutch: | Wet, multiplate with coil springs | Dry multiplate with hydraulic control |
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | Chain | Chain |
| Front Suspension: | 37mm telescopic fork | Showa 43 mm fully adjustable upside-down lightweight fork |
| Front Wheel Travel: | 130 mm / 5.1 in | 120 mm / 4.7 in |
| Rear Suspension: | Monoshock | Progressive cantilever linkage with fully adjustable Öhlins monoshock, with length adjustment, aluminium swing arm |
| Rear Wheel Travel: | 100 mm / 3.9 in | 145 mm / 5.7 in |
| Front Brakes: | Single 276mm disc 2 piston caliper | 2 x 320 mm Discs. 4 piston calipers |
| Rear Brakes: | 130mm drum | Single 245 mm disc, 2 piston caliper |
| Front Tyre: | 100/80–17 | 120/70-17 |
| Rear Tyre: | 130/70–17 | 180/55-17 |
| Trail: | 99 mm / 3.9 in | 69 mm / 2.7 in |
| Wheelbase: | 1370 mm / 53.9 in | 1395 mm / 54.9 in |
| Seat Height: | 780 mm / 30.7 in | 820 mm / 32.3 in |
| Dry Weight: | 138.5 kg / 306.4 lbs | 185.2 kg / 407.8 lbs |
| Fuel Capacity: | 16 Litres / 4.2 US gal | 16 L / 4.2 US gal / 3.5 Imp gal |