Honda C 77 Superhawk (1961-68) vs Sherco 4.5i Enduro (2007-09)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | Sherco |
| Model: | C 77 Superhawk | 4.5i Enduro |
| Years: | 1961-68 | 2007-09 |
| Engine: | Four stroke, twin cylinder SOHC | Four stroke, single cylinder, SOHC, 4 valve |
| Capacity: | 305 cc / 18.6 cu-in | 448.6 cc / 27.3 cu-in |
| Bore x Stroke: | 60 x 54 mm | 94,5 x 64 mm |
| Cooling System: | Air cooled | Liquid cooled |
| Compression Ratio: | 9.5:1 | 12.0:1 |
| Induction: | 2 × 26 mm Keihin carburetors | Electronic fuel injection/digital engine management: Magneti Marelli Injection |
| Ignition: | Battery and coil | Kokusan DC - CDI ignition with digital advance |
| Starting: | Kick | Electric |
| Max Power: | 28 hp / 21 kW @ 7500 rpm | NA |
| Max Torque: | 23.1 Nm / 17.0 lb-ft @ 6000 rpm | NA |
| Clutch: | Wet: multi-plates | Hydraulic, multidisc in oil bath |
| Transmission: | 4 Speed | 6 Speed |
| Final Drive: | Chain | Chain |
| Front Suspension: | Hydra lick forks | Ø46 mm Paioli/Kayaba telescopic fork. Forward offset wheel axle and brake calliper |
| Frame: | Tubular steel | Built from Chrome-Molybdenum forming a single structure |
| Rear Suspension: | Dual chocks | Progressive system with single Paioli absorber with aluminium structure and fully adjustable (four regulation types), linked to the centre of the chassis and pushed by the swing arm through an articulated rod system |
| Front Brakes: | Drum | Single 270mm disc |
| Rear Brakes: | Drum | Single 240mm disc |
| Front Tyre: | 275x18 | 90/90 -21 |
| Rear Tyre: | 300x18. | 120/90 -18 |
| Wheelbase: | 1300 mm / 51.0 in | 1485 mm / 58.5 in |
| Seat Height: | 760 mm / 30.0 in | 885 mm / 34.8 in |
| Fuel Capacity: | 13 Litres / 3.6 US gal | 8.5 Litres / 2.2 US gal |