Harley-Davidson Harley Davidson XL 883N Iron (2010) vs Hyosung GT 250R (2007-09)

Comparison technical specifications

Add bike	Remove bike	Remove bike
Make:	Harley-Davidson	Hyosung
Model:	Harley Davidson XL 883N Iron	GT 250R
Years:	2010	2007-09
Engine:	Four stroke, 45° V-Twin, OHV, 2 valves per cylinder.	Four stroke, 75° V twin, DOHC, 4 per valve cylinder.
Capacity:	883 cc / 50.8cu in/	248 cc / 15.2 cu-in
Bore x Stroke:	76.2 x 96.8 mm	57 x 48.8 mm
Cooling System:	Air cooled	Oil / Air
Compression Ratio:	8.8:1	11.0:1
induction:	Electronic sequential port fuel injection	2x 26mm Mikuni carburetors
Ignition:	Digital CDI	Digital CDI
Starting:	Electric	Electric
Max Torque:	73 Nm / 7.44 kgf-m / 53.8 ft/lb @ 3750 rpm	20.6 Nm / 2.1 kgf-m @ 7300 rpm
Clutch:	Multi-plate clutch with diaphragm spring in oil bath	Wet Multi-Plate
Transmission:	5 Speed	5 Speed
Final Drive:	Belt	Chain
Frame:	Mild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions, MIG welded	Perimeter Double Cradle
Front Suspension:	∅39mm Fork	41mm Oil upside down forks
Front Wheel Travel:	92 mm / 3.62 in.	120 mm / 4.7 in
Rear Suspension:	Coil-over, dual-adjustable preload	Swinging arm
Rear Wheel Travel:	41 mm / 1.6 in.	100 mm / 3.9 in
Front Brakes:	Single ∅300mm disc, 2 x ∅38mm piston calipers	Single 300mm disc
Rear Brakes:	Single ∅260mm disc, 2 x ∅38mm piston calipers	Single 230mm disc
Front Tyre:	100/90B19 57H	110/70 -17
Rear Tyre:	130/90-16	150/70 -17
Dimensions:	Length 2179 mm / 85.4 in Width 821 mm / 32.3 in Height 1107 mm / 43.5 in	Length 2060 mm / 81.1 in Width 655 mm / 25.7 in Height 1135 mm / 44.6 in
Wheelbase:	1519 mm / 59.5 in.	1435 mm / 56.4 in
Seat Height:	Laden 653 mm / 25.7 in Unladen 683 mm / 26.9 in.	780 mm / 30.7 in
Fuel Capacity:	12.5 Litres / 3.3 US gal	17 Litres / 4.4 US gal