Harley-Davidson Harley Davidson Softail Fat Boy (2015) vs MV Agusta Turismo Veloce Lusso RC (2017-18) vs Harley-Davidson Harley Davidson Forty-Eight Special (2018-19)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Harley-Davidson | MV Agusta | Harley-Davidson |
| Model: | Harley Davidson Softail Fat Boy | Turismo Veloce Lusso RC | Harley Davidson Forty-Eight Special |
| Years: | 2015 | 2017-18 | 2018-19 |
| Engine: | Four stroke, V-Twin, Twin Cam 103B Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, two valves per cylinder, with Integrated Oil-Cooler | Four stroke, transverse three cylinder. DOHC, 4 Valve per cylinder, | Evolution, four stroke, 45° V-Twin, OHV, 2 valves per cylinder |
| Capacity: | 1690 cc / 103.1 cub in. | 798 cc / 48.6 cu-in | 1202 cc / 73.4 cu in |
| Bore x Stroke: | 98.4 x 111.1 mm | 79 x 54.3 mm | 88.9 x 96.8 mm |
| Cooling System: | Air cooled | Oil & air Cooled | Air cooled |
| Compression Ratio: | 9.6:1 | 12.2;1 | 10.01:1 |
| Induction: | Electronic Sequential Port Fuel Injection (ESPFI) | Injection | Electronic Sequential Port Fuel Injection (ESPFI) |
| Ignition: | Single-fire, non-wasted, map-controlled spark ignition | Motor and Vehicle Integrated Control System | Digital CDI |
| Starting: | Electric | Electric | Electric |
| Max Torque: | 134 Nm / 13.7 kgf-m / 98.8 ft. lbs @ 3500 rpm | 80 Nm / 59.0 lb-ft @ 8000 rpm | 99 Nm / 73 ft/lbs @ 3500 rpm |
| Transmission: | 6 Speed | 6 Speed | 5 Speed |
| Final Drive: | Belt | Chain | Belt |
| Gear Ratio: | 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.79 | 1st: 13/37 2nd 16/34 3rd 18/32 4th 19/30 5th 21/30 6th 22/29 | 1st 9.315 / 2nd 6.653 / 3rd 4.948 / 4th 4.102 / 5th 3.517 |
| Frame: | Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded | ALS Steel tubular trellis (MAG welded | Mild steel, tubular frame; circular sections; cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded |
| Front Suspension: | 41.3 mm telescopic, chrome dust covers | Marzocchi “UPSIDE DOWN” telescopic hydraulic fork with rebound-compression damping and spring preload external and separate adjustment. Front wheel travel: 160 mm (6.3 inches) | Front forks with cartridge dampening technology |
| Rear Suspension: | Hidden, horizontal-mounted, coil-over shock | Progressive Sachs, single shock absorber with rebound and compression damping and spring preload adjustment | Emulsion technology rear shocks with 50 mm range of pre-load adjustability and an under-seat, rear shock suspension adjustment wrench |
| Front Brakes: | 2x Discs 4 piston caliper | 2x 320mm floating discs 4 piston calipers | Single 300mm disc, 2 x 38mm piston calipers |
| Rear Brakes: | Single disc 2 piston caliper | Single 220mm disc 2 piston caliper | Single 300mm disc, 2 x 38mm piston calipers |
| Front Tyre: | 140/75R17 67V | 120/70 - ZR 17 M/C (58 W) | 130/90 B16 73H |
| Rear Tyre: | 200/55R17 78V | 190/55 - ZR 17 M/C (75 W) | 150/80 B16 77H |
| Trail: | 147 mm / 5.8 in | 95 mm / 3.7 in | 135 mm / 5.3 in |
| Dimensions: | Length 2396 mm / 94.3 in | length 2125 mm / 83.7 in Width 910 mm / 35.8 in | Length 2165 mm / 85.2 in |
| Wheelbase: | 1635 mm / 64.2 in | 1415 mm / 56.9 in | 1495 mm / 58.9 in |
| Seat Height: | Laden 635 mm / 25.0 in Unladen 690 mm / 27.1 in | 870 mm / 34.23 in | 705 mm / 27.7 in Unladen |
| Fuel Capacity: | 18.9 Litres / 5.0 US gal | 20 Litres / 5.2 US gal | 7.9 Litres / 2.1 US gal |