Moto-Data

Harley-Davidson Harley Davidson Softail Fat Boy 114 30th Anniversary (2020) vs Harley-Davidson Harley Davidson Softail Fat Boy 114 (2020)

Comparison technical specifications


Add bike
2020 Harley-Davidson Harley Davidson Softail Fat Boy 114 30th Anniversary
Remove bike
2020 Harley-Davidson Harley Davidson Softail Fat Boy 114
Remove bike
Make: Harley-Davidson Harley-Davidson
Model: Harley Davidson Softail Fat Boy 114 30th Anniversary Harley Davidson Softail Fat Boy 114
Years: 2020 2020
Engine: Four stroke, V-Twin, 2 Milwaukee-Eight 114, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder Four stroke, V-Twin, 2 Milwaukee-Eight 114, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity: 1868 cc / 114 cu-in 1868 cc / 114 cu-in
Bore x Stroke: 102 x 114.3 mm 102 x 114.3 mm
Cooling System: Air cooled Air cooled
Compression Ratio: 10.5:1 10.5:1
Exhaust: 2-into-2 staggered, catalyst in muffler 2-into-2 staggered, catalyst in muffler
Induction: Electronic Sequential Port Fuel Injection (ESPFI) Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication: Pressurized, dry-sump with oil cooler Pressurized, dry-sump with oil cooler
Ignition: Single-fire, non-wasted, map-controlled spark ignition Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric Electric
Max Torque: 161 Nm / 119 lb-ft @ 3000 161 Nm / 119 lb-ft @ 3000
Clutch: Mechanical, 10 plate wet, assist & conventional Mechanical, 10 plate wet, assist & conventional
Transmission: 6 Speed 6 Speed
Primary Drive: Chain, 34/46 ratio Chain, 34/46 ratio
Final Drive: Belt, 32/66 ratio Belt, 32/66 ratio
Gear Ratio: 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.79 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.79
Lean Angle, Left: 25.6º 25.6º
Lean Angle, Right: 25.6º 25.6º
Frame: Mild steel, tubular frame, rectangular section backbone, stamped, cast, and forged junctions, MIG welded, aluminum forged fender supports Mild steel, tubular frame, rectangular section backbone, stamped, cast, and forged junctions, MIG welded, aluminum forged fender supports
Swingarm: Mild steel, tubular sections, stamped x-member, forged axle junctions, MIG welded, removable belt spacer Mild steel, tubular sections, stamped x-member, forged axle junctions, MIG welded, removable belt spacer
Front Suspension: Dual bending valve 49mm telescopic with aluminum fork triple clamps, dual rate spring, "beer can" covers Dual bending valve 49mm telescopic with aluminum fork triple clamps, dual rate spring, "beer can" covers
Front Wheel Travel: 130 mm / 5.1 in 130 mm / 5.1 in
Rear Suspension: Hidden, free piston, coil-over monoshock, 43mm stroke, toolless hydraulic preload adjustment Hidden, free piston, coil-over monoshock, 43mm stroke, toolless hydraulic preload adjustment
Rear Wheel Travel: 86 mm / 3.4 in 86 mm / 3.4 in
Front Brakes: 2x 300mm discs, 4 piston fixed caliper 2x 300mm discs, 4 piston fixed caliper
Rear Brakes: Single 292mm disc, 2 piston floating caliper Single 292mm disc, 2 piston floating caliper
ABS: Standard Standard
Front Wheel: 18 x 4,5 in 18 x 4,5 in
Rear Wheel: 18 x 8.0 in 18 x 8.0 in
Front Tyre: 160/60R18,70V,BW 160/60R18,70V,BW
Rear Tyre: 240/40R18,79V,BW 240/40R18,79V,BW
Rake (steering head): 30° 30°
Trail: 104 mm / 4.1 in 104 mm / 4.1 in
Dimensions: Length 2370 mm / 93.3 in Width 985 mm / 38.3 in Height 1095 mm / 43.1 in Length 2370 mm / 93.3 in Width 985 mm / 38.3 in Height 1095 mm / 43.1 in
Wheelbase: 1655 mm / 65.6 in 1655 mm / 65.6 in
Ground Clearance: 115 mm / 4.5 in 115 mm / 4.5 in
Seat Height: Unladen 675 mm / 26.6 in Laden 658 mm / 25.9 in Unladen 675 mm / 26.6 in Laden 658 mm / 25.9 in
Dry Weight: 304 kg kg / 671 lbs 304 kg kg / 671 lbs
Wet Weight: 317 kg / 699 lbs 317 kg / 699 lbs
Fuel Capacity: 18.9 Litres / US 5.0 gal 18.9 Litres / US 5.0 gal