Harley-Davidson Harley Davidson FLTRX Road Glide Special (2017) vs Yamaha FJR 1300A (2006)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Harley-Davidson | Yamaha |
| Model: | Harley Davidson FLTRX Road Glide Special | FJR 1300A |
| Years: | 2017 | 2006 |
| Engine: | Four stroke, V-Twin, Milwaukee-Eight 107, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. |
| Capacity: | 1746 cc / 107 cub in. | 1298 cc / 79.2 cu-in cc / 79.2 cu-in |
| Bore x Stroke: | 100 x 111 mm | 79 x 66.2 mm |
| Cooling System: | Air cooled | Liquid cooled |
| Compression Ratio: | 10.0:1 | 10.8:1 |
| Induction: | Electronic Sequential Port Fuel Injection (ESPFI) | Electronic Fuel Injection |
| Lubrication: | Pressurized, dry-sump with oil cooler | Wet sump |
| Ignition: | Single-fire, non-wasted, map-controlled spark ignition | TCI (Transistor Controlled Ignition) |
| Starting: | Electric | Electric |
| Max Torque: | 154 Nm / 113.6 lb-ft @ 3250 rpm | 125 Nm / 13.7kgf-m @ 6000 rpm |
| Clutch: | Hydraulically actuated, 9 plate wet, with high performance spring | Wet, multiple discs, cable operated |
| Transmission: | 6 Speed Cruise Drive® | 5 Speed |
| Final Drive: | Belt, 32/68 ratio | Shaft |
| Frame: | Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded | Aluminium, twin spar |
| Front Suspension: | 41.3 mm telescopic, triple circuit damping | 48mm upside-down telescopic fork w/adjustable preload, compression and rebound damping |
| Rear Suspension: | Low air-adjustable low profile air ride rear suspension | Single shock, link-type, w/adjustable preload and rebound damping |
| Front Brakes: | 2x 300mm discs 4 piston calipers | 2x 320mm discs 4 piston calipers |
| Rear Brakes: | Single 300mm discs 4 piston caliper | Single 283mm disc 2 piston caliper |
| Front Tyre: | 130/60B19 61H | 120/70 ZR17 |
| Rear Tyre: | BW 180/65B16 81H | 180/55 ZR17 |
| Rake: | 26° | 26.0° |
| Trail: | 173 mm / 6.8 in | 102 mm / 4.3 in. |
| Dimensions: | Length 2423 mm / 95.4 in | Length 2230 mm / 87.8 in. Width 749.3 mm / 29.5 in. Height 1455 mm / 57.3 in. |
| Wheelbase: | 1625 mm / 64 in | 1544.3 mm / 60.8 in |
| Seat Height: | Laden 7 658 mm / 25.9 in. Unladen 7 684 mm / 26.9 in. | 805 mm - 825.5 mm / 31.7 in - 32.5 in. |
| Dry Weight: | 370 kg / 816 lbs | 264 kg / 582 lbs |
| Wet Weight: | 387 kg / 853 lbs | 292 kg / 644 lbs |
| Fuel Capacity: | 22.7 Litres / 6.0 US gal | 25 Liters / 6.6 gal |