Ducati Scrambler Full Throttle (2017-18) vs Ducati Hypermotard 939 (2017)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Ducati | Ducati |
| Model: | Scrambler Full Throttle | Hypermotard 939 |
| Years: | 2017-18 | 2017 |
| Engine: | Four stroke, 90° “L” twin cylinder, SOHC, desmodromic 2 valve per cylinder | Testastretta 11°, L-Twin cylinder, 4 valve per cylinder, Desmodromic |
| Capacity: | 803 cc / 49.0 cub in | 937 cc / 57.2 cu in |
| Bore x Stroke: | 88 x 66 mm | 94 x 67.5 mm |
| Cooling System: | Air cooled | Liquid cooled |
| Compression Ratio: | 11.0:1 | 13.1:1 |
| Induction: | Electronic fuel injection, 50 mm throttle bodies | Magneti Marelli electronic fuel injection system. Throttle bodies with full Ride by Wire system |
| Ignition: | Marelli electronic | Electronic |
| Starting: | Electric | Electric |
| Exhaust: | Exhaust system with twin stainless steel mufflers with aluminium exterior cover, catalytic converter and 2 lambda probes | Single stainless steel muffler with catalytic converter and two lambda probes |
| Max Power: | 55 kW / 75 hp @ 8250 rpm | 82 kW / 110 hp @ 9000 rpm |
| Max Torque: | 68 Nm / 6.9 kgf-m / 50 lb-ft @ 5750 rpm | 97.9 Nm / 9.98 kgf-m / 72.2 lb-ft @ 7500 rpm |
| Clutch: | APTC wet multiplate with mechanical control | Wet multiplate clutch mechanically operated, self-servo action on drive, slipper action on over-run |
| Transmission: | 6 Speed | 6-Speed |
| Final Drive: | Chain, front spocket 15, rear sprocket 46 | Chain, front sprocket 15, rear sprocket 43 |
| Primary Drive: | Straight cut gears, ratio 1.85:1 | Straight cut gears, 1.85:1 ratio |
| Frame: | Tubular steel Trellis frame | Tubular steel Trellis frame |
| Front Suspension: | Upside down Kayaba 41 mm fork | 43mm USD forks |
| Front Wheel Travel: | 150 mm / 5.9 in | 170 mm / 6.7 in |
| Rear Suspension: | Kayaba rear shock, pre-load adjustable | Progressive linkage with adjustable spring preload and rebound damping Sachs monoshock. Aluminium single-sided swingarm |
| Rear Wheel Travel: | 150 mm / 5.9 in | 150 mm / 5.9 in |
| Front Brakes: | Single 330 mm disc, 4-piston caliper with ABS as standard equipment | 2 x 320 mm Semi-floating discs, radially mounted Brembo monobloc callipers, 4-piston 2-pad, axial pump with adjustable lever, with Bosch ABS as standard |
| Rear Brakes: | Single 245 mm disc, 1-piston caliper with ABS as standard equipment | 245 mm Disc, 2-piston caliper, with Bosch ABS as standard |
| Front Wheel: | 10-spoke in light alloy 3.00" x 18" | 10-Spoke in light alloy 3.50" x 17" |
| Rear Wheel: | 10-spoke light alloy 5.50" x 17" | 10-Spoke in light alloy 5.50" x 17" |
| Front Tyre: | 110/80 R18 Pirelli MT 60 RS | 120/70 ZR17 Pirelli Diablo Rosso II |
| Rear Tyre: | 180/55 R17 Pirelli MT 60 RS | 180/55 ZR17 Pirelli Diablo Rosso II |
| Rake: | 24° | 25.5º |
| Trail: | 112 mm / 4.4 in | 104 mm / 4.1 in |
| Wheelbase: | 1455 mm / 57.3 in | 1493 mm / 58.8 in |
| Seat Height: | 790 mm / 31.1 in. low seat 770 mm / 30.3 in. available as accessory | 870 mm / 34.2 in |
| Dry Weight: | 170 kg / 375 lbs | 181 kg / 399 lbs |
| Wet Weight: | 186 kg / 410 lbs | 204 kg / 450 lbs |
| Fuel Capacity: | 13.5 Litres / 3.57 US gal / 3.0 Imp gal | 16 Litres / 4.2 US gal |