CCM 404 DS Supermoto (2008-09) vs Honda CBR 150R (2019-20) vs Suzuki TU 250X (2008-10)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | CCM | Honda | Suzuki |
| Model: | 404 DS Supermoto | CBR 150R | TU 250X |
| Years: | 2008-09 | 2019-20 | 2008-10 |
| Engine: | Four stroke, single cylinder, DOHC, 4 valves | Four stroke, single cylinder, DOHC, 4valve | Four stroke, single cylinder, SOHC, 4 valves |
| Capacity: | 398 cc / 24.3 cu in | 149.4 cc / 9.1 cu-in | 249 cc / 15.2 cu-in |
| Bore x Stroke: | 90 x 62.6 mm | 63.5 x 47.2 mm | 72 x 61.2 mm |
| Compression Ratio: | 12.2:1 | 11.0:1 | 9.0:1 |
| Cooling System: | Liquid cooled | Liquid cooled | Air/oil-cooled |
| Induction: | Keihin FCR 39 | Injection | EFI |
| Ignition: | Electronic CDI | CDI | Electronic ignition (fully transistorized) |
| Starting: | Electric | Electric | Electric |
| Max Power: | 39.5 kW / 53 hp @ 7000 rpm | 16.9 hp / 12.6 kW @ 9000 rpm | 15 kW / 20 hp @ 8000 rpm |
| Transmission: | 5 Speed | 6 Speed | 5 Speed |
| Final Drive: | Chain, 520 Heavy duty, O-ring | Chain | Chain |
| Front Suspension: | WP 48mm adjustable for compression and rebound | Telescopic forks | Telescopic, hydraulic dampers, coil springs |
| Rear Suspension: | WP PDS adjustable for compression, rebound and preload | Monoshock | Swinging arm, hydraulic dampers, coil springs |
| Front Brakes: | Single 320 mm disc, Brembo 2 piston caliper | Single 276mm disc 2 piston caliper | Single disc |
| Rear Brakes: | Single 200 mm disc, Brembo 1 piston caliper | Single 220mm disc 2 piston caliper | Drum |
| Front Tyre: | 120/70-17 | 100/80-17 | 90/90-18 |
| Rear Tyre: | 150/70 -17 | 130/70- 17 | 110/90-18 |
| Wheelbase: | 1500 mm / 59.1 in | 1305 mm / | 1375 mm / 54.1 in |
| Ground Clearance: | 352 mm / 13.9" | 166 mm / 6.5 in | 165 mm / 6.5 in |
| Seat Height: | 950 mm / 37.4 in | 825 mm / 32.5 in | 770 mm / 30.3 in |
| Fuel Capacity: | 11 L / 2.9 US gal | 13 Litres / 3.4 US gal | 12 Litres / 3.2 US gal / 2.6 Imp gal |