Buell / EBR Buell 1125CR (2010) vs KTM 250 EXC-E (2011) vs KTM RC8R 1190 (2011) vs ATK 125 2-Stroke (2003) vs Adler MB 250 (1955)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Buell / EBR | KTM | KTM | ATK | Adler |
| Model: | Buell 1125CR | 250 EXC-E | RC8R 1190 | 125 2-Stroke | MB 250 |
| Years: | 2010 | 2011 | 2011 | 2003 | 1955 |
| Engine: | Four stroke, 72° V-Twin | Two stroke, single cylinder | Four stroke, 75°V-twin cylinder, DOHC, 4 valves per cylinder | Two stroke, single cylinder | 2 cylinder, 2 stroke, flat-crowned pistons |
| Capacity: | 1125 cc / 68.7 cu in | 249 cc / 15.2 cu in | 1195 cc / 73.0 cu-in | 125 cc / 7.7 cu in | 247 cc / 15.1 cub in. |
| Compression Ratio: | 12.3:1 | 12.8:1 | 13.5 :1 | 11.2:1 | 1: 5.75 |
| Final Drive: | Belt | Chain, 5/8 x 1/4 in | Chain 5/8 x 5/16" X Ring | Chain | Chain, fully enclosed |
| Front Suspension: | Ø47 mm Showa inverted forks, adjustable compression damping. rebound damping and spring preload. 120mm wheel travel. | WP Suspension – 4860 MXMA / MXMA + PA | 43mm WP Upside down adjustable | Telescopic forks | Twin swinging leading link forks with shock absorber and steering damper |
| Rear Suspension: | 120 mm / 4.7" | WP Suspension – 5018 PDS MCC / DCC, aluminium swing arm | WP shock, fully adjustable | Mono shock | Plunger shock absorbers, adjustable for load and road conditions |
| Wheelbase: | 1384 mm / 54.5" | 1475 mm / 58.1 in | 1425 mm / 56.1 in | 1460 mm / 57.5 in | 1257 mm / 49.5 in. |
| Dry Weight: | 168 kg / 370 lbs | 103 kg / 227 lbs | 186.0 kg / 410.1 lbs | 103 kg / 227 lbs | 135 kg / 298 lbs |
| Fuel Capacity: | 21.2 L / 5.6 US gal | 9.5 Litres / 2.5 US gal | 16.5 Litres / 4.3 gal | 14 L / 3.7 US gal | 12 L / 3.2 US gal |