BMW R 80ST (1982)
Comparison technical specifications
Add bike |
Remove bike |
| Make: | BMW |
| Model: | R 80ST |
| Years: | 1982 |
| Engine: | Four stroke, two cylinder horizontally opposed Boxer, pushrod operated 2 valves per cylinder. |
| Capacity: | 797.5 cc / 48.7 cu in. |
| Bore x Stroke: | 84.8 x 70.6 mm |
| Cooling System: | Air cooled |
| Compression Ratio: | 9.2:1 |
| Induction: | 2 x Bing constant depression carburetors |
| Ignition: | Battery ignition |
| Alternator: | Bosch 12 V/280 W |
| Spark Plug: | Bosch W 7 D / Beru14-7DU / Champion N9YC |
| Starting: | Electric |
| Max Power: | 36.4 kW / 50 hp @ 6500 rpm |
| Max Torque: | 58 Nm / 5.9 kgf-m / 42 ft/lb @ 4000 rpm |
| Clutch: | Dry single plate, with diaphragm spring |
| Transmission: | 5 Speed |
| Final Drive: | Shaft |
| Gear Ratio: | 1st 4.40 / 2nd 2.86 / 3rd 2.07 / 4th 1.67 / 5th 1.50:1 |
| Rear Wheel Ratio: | 1:3.20 or 1:3.36 |
| Frame: | Double loop tubular frame with bolt on rear section |
| Front Suspension: | Telescopic hydraulic fork |
| Front Wheel Travel: | 175 mm / 6.8 in |
| Rear Suspension: | BMW Monolever swinging arm |
| Rear Wheel Travel: | 153 mm / 6.0 in |
| Front Brakes: | Single ∅285mm disc, 1 piston caliper |
| Rear Brakes: | ∅200mm Drum |
| Front Wheel: | 1.85 - B19 |
| Rear Wheel: | 2.50 - B18 |
| Front Tyre: | 100/90-H19 |
| Rear Tyre: | 120/90-H18 |
| Dimensions: | Length 2180 mm / 85.8 in Width 790 mm / 31.1 in Height 1150 mm / 45.2 in |
| Wheelbase: | 1447 mm / 56.9 in |
| Ground Clearance: | 170 mm / 6.69 in |
| Seat Height: | 845 mm / 33.3 in |
| Wet Weight: | 198 Kg / 436 lbs |
| Fuel Capacity: | 19 Litres / 5.0 US gal |
| Consumption Average: | 4.9 L/100 km / 20.4 km/l / 48 mpg |
| Standing ¼ Mile: | 14.1 sec / 148.5 km/h / 92.3 mph |
| Top Speed: | 171 km/h / 106 mph |
| Road Test: | Cycle 1983 Cycle World 1983 |