BMW R 60/5 (1971-73) vs Victory Hard-Ball (2012-13)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | BMW | Victory |
| Model: | R 60/5 | Hard-Ball |
| Years: | 1971-73 | 2012-13 |
| Engine: | Four stroke, two cylinder horizontally opposed Boxer, pushrod operated 2 valves per cylinder. | Four stroke, 50° V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters |
| Capacity: | 599 cc / 36.6 cu in. | 1731cc /106 cu-in |
| Bore x Stroke: | 73.5 x 70.6 mm | 101 x 108 mm |
| Compression Ratio: | 9.2:1 | 9.4:1 |
| Cooling System: | Air cooled | Air/oil cooled |
| Induction: | 2 x Bing slide carburetors | Electronic Fuel Injection with dual 45mm throttle bodies |
| Starting: | Kick | -Electric |
| Clutch: | Dry single plate, with diaphragm spring | Wet, multi-plate |
| Max Power: | 29.5 kW / 40 hp @ 6400 rpm | 96.9 hp / 71.3 kW |
| Max Torque: | 49 Nm / 5.0 kgf-m / 36 ft lb @ 5000 rpm | 144 Nm / 14.6 kgf-m / 106 ft-lb |
| Transmission: | 4 Speed | 6 Speed |
| Final Drive: | Shaft | Carbon fiber reinforced belt |
| Front Suspension: | Telescopic hydraulic forks | 43mm Conventional telescopic fork |
| Front Wheel Travel: | 208 mm / 8.2" | 130 mm / 5.1 in |
| Rear Suspension: | Long swinging arm with strut | Single, mono-tube gas Cast Aluminum with rising rate linkage, Preload adjustable spring |
| Rear Wheel Travel: | 125 mm / 4.9" | 75 mm / 3.0 in |
| Front Brakes: | ∅200mm Drum | 2x 300mm floating rotor 4 piston caliper, ABS |
| Rear Brakes: | ∅200mm Drum | Single 300mm floating rotor 2 piston caliper, ABS |
| Front Tyre: | 3.25 - S19 | 130/70-18 67H Dunlop 491 Elite II |
| Rear Tyre: | 4.00 - S18 | 180/70-16 Dunlop Elite 3 |
| Fuel Capacity: | 24 liters / 6.3 US gal | 22 Litres / 5.8 US gal |