BMW R 24 (1948-50) vs Husaberg FE 570 Enduro (2010-11) vs Honda VFR 400R NC30 (1990) vs BMW R 61 (1938-41) vs BMW R 11 (1929-34) vs MV Agusta Dragster 800 Rosso (2020)

Comparison technical specifications

Add bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike
Make:	BMW	Husaberg	Honda	BMW	BMW	MV Agusta
Model:	R 24	FE 570 Enduro	VFR 400R NC30	R 61	R 11	Dragster 800 Rosso
Years:	1948-50	2010-11	1990	1938-41	1929-34	2020
Engine:	Four stroke, single cylinder, pushrod operated, OHV, 2 valves per cylinder.	Four stroke, single-cylinder, SOHC, 4 valves	Four stroke 90°V-four cylinder, DOHC, 4 valves per cylinder	Four stroke, two cylinder horizontally opposed Boxer, pushrod operated 2 valves per cylinder.	Four stroke, two cylinder flat twin, Side valve	Four stroke, transverse three cylinder. DOHC, 4 Valve per cylinder
Capacity:	247 cc / 15.1 cu in.	565.5 cc / 34.5 cu-in	399 cc / 15.7 cu-in	600 cc / 36.6 cu in.	745 cc / 45.5 cu in.	798 cc / 48.69 cu-in
Bore x Stroke:	68 x 68 mm	100 x 72 mm	55 x 42 mm	70 x 78 mm	78 x 78 mm	79 x 54.3 mm
Compression Ratio:	6.75:1	12.2:1	11.3:1	5.7:1	5.5:1	12.3:1
Cooling System:	Air cooled	Liquid cooled	Liquid cooled	Air cooled	Air cooled	Cooling with separeted liquid and oil radiators
Ignition:	Battery ignition	Kokusan digital	Digitalized full transistor ignition	Battery ignition	Magneto	Multipoint electronic injection
Starting:	Kick	Electric	Electric	Kick	Kick	Electric
Clutch:	Single plate, dry	Wet multi-disc clutch, hydraulically operated	Wet, cable operated	Single plate, dry	Single plate dry clutch	Hydraulically actuated Wet-clutch, multi-disc with back torque limiting device
Max Power:	8.9 kW / 12 hp @ 5600 rpm	NA	59.hp / 43.1 kW @ 12800 rpm	13.4 kW / 18 hp @ 4800 rpm	13.4 kW / 18hp @ 3400 rpm ( 1933: 14.9 kW / 20hp @ 4400 rpm)	81 kW / 110 hp @ 11500 rpm
Frame:	Closed steel twin loop frame, welded	Double cradle perimeter design 25CrMo4, subframe Cross-linked Polyethylene	Twin-spar aluminum	Twin loop steel tubular frame	Twin loop pressed steel frame	ALS Steel tubular trellis, aluminium alloy rear swing arm pivot plates
Front Suspension:	Telescopic fork	WP USD 4860 MA Husaberg Enduro	41mm inverted forks: preload and rebound damping	Telescopic fork	Plate spring 9 laminae	43mm Type Marzocchi USD telescopic hydraulic fork in DLC treated aluminium, with anodized fork legs and having rebound-compression damping and spring preload external and separate adjustment
Rear Suspension:	Rigid, spring loaded saddle	WP PDS 5018 Husaberg Enduro	Rising-rate monoshock: pre-load and rebound damping	Telescopic suspension	Rigid, spring loaded saddle	Progressive Sachs, single shock absorber with rebound and compression damping and spring preload adjustment, Aluminium alloy single sided swing arm
Rear Brakes:	∅160mm Drum	Single 220mm disc 1 piston caliper	Single disc 2 piston caliper	External shoe brake at the gearing on Cardan shaft	∅37mm Cardan brake	Single 220mm disc 2 piston Brembo caliper
Fuel Capacity:	12 L / 3.1 US gal	9 Litres / 2.4 US gal	18 Litres / 4.0 gal	14 liters / 3.6 US gal	14 L / 3.7 US gal	16.5 Litres / US 4.36 gal