BMW K1 (1989) vs Benelli TNT 1130 Sport EVO (2007-08)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | BMW | Benelli |
| Model: | K1 | TNT 1130 Sport EVO |
| Years: | 1989 | 2007-08 |
| Engine: | Four-stroke, horizontal in line four cylinder, DOHC, 4 valves per cylinder | Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder |
| Capacity: | 987 cc / 60.2 cu in | 1130 cc / 69 cu in |
| Bore x Stroke: | 67 x 70 mm | 88 x 62 mm |
| Compression Ratio: | 11.0:1 | 11.5:1 |
| Cooling System: | Liquid cooled | Liquid cooled |
| Induction: | Electronic injection, Bosch Motronic | Electronic injection with 1 injector per cylinder |
| Starting: | Electric | Electric |
| Max Power: | 72.9 kW / 100 hp @ 8000 rpm (rear tyre: 70.1 k/w / 94.0 hp @ 8400 rpm) | 101 kW / 131.3 hp @ 9250 rpm |
| Max Torque: | 100 Nm / 10.2 kgf-m / 74 ft lb @ 6750 rpm | 117 Nm / 11.9 kgf-m / 86.3 lb-ft @ 7750 rpm |
| Transmission: | 5 Speed | 6 Speed |
| Final Drive: | Shaft | Chain |
| Front Suspension: | Telescopic fork with hydraulic shock absorber | Marzocchi “upside down” stanchion fork Ø 50mm, adjustable in compression and extension with spring pre-load |
| Rear Suspension: | Monolayer swinging arm | Asymmetric swingarm, composed of cast aluminium and pressed in aluminium alloy, with Extreme Technology single shock absorber adjustable in compression, dual regulation for low and high speed damping andextension and spring pre-load. |
| Front Brakes: | 2 x ∅305mm discs, 4 piston calipers | 2 x 320mm Ø discs, 4 piston calipers |
| Rear Brakes: | Single ∅285mm disc, 1 piston caliper | Single 220 mm Ø disc, 2 piston caliper |
| Front Tyre: | 120/70 ZR17 | 120/70-17 |
| Rear Tyre: | 160/60 ZR18 | 190/50-17 |
| Fuel Capacity: | 22 L / 5.8 US gal | 16 Litres / 4.2 US gal |
| Consumption Average: | 5.6 /100 km / 17.8 km/l / 41.9 US mpg | 5.9 L/100 km / 16.9 km/l / 40 US mpg |
| Standing ¼ Mile: | 11.4 sec / 192.8 km/h / 119.8 mph | 10.9 sec |
| Top Speed: | 240.4 km/h / 149.4 mph | 243.0 km/h / 151 mph |