Moto-Data

BMW F 800ST Touring (2011) vs BMW F 800R (2011) vs BMW K 1600 GTL (2011)

Comparison technical specifications


Add bike
2011 BMW F 800ST Touring
Remove bike
2011 BMW F 800R
Remove bike
2011 BMW K 1600 GTL
Remove bike
Make: BMW BMW BMW
Model: F 800ST Touring F 800R K 1600 GTL
Years: 2011 2011 2011
Engine: Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder Four stroke, transverse six cylinder, 4 valves per cylinder
Capacity: 798 cc / 47.7 cub. in. 798 cc / 47.7 cub. in. 1649 cc / 100.6 cu in.
Bore x Stroke: 82 x 75.8 mm 82 x 75.8 mm 72 x 67.5 mm
Compression Ratio: 12.0:1 12.0:1 12.2:1
Induction: Electronic intake injection Electronic injection, digital engine electronics (BMS-KP) ∅52mm Throttle valve diameter, BMS-X
Ignition: Knock control and oxygen sensors Knock control and oxygen sensors. Digital CDI
Alternator: Three-phase alternator 400 W Three-phase alternator 400 W 580 W Alternator
Battery: 12V / 14 Ah, maintenance-free 12 V / 14 Ah, maintenance-free 12 V / 19 Ah maintenance free
Starting: Electric Electric Electric
Max Power: 62.5 kW / 85 hp @ 8000 rpm 64 kW / 87 hp @ 8000 rpm 118 kW / 160.5 hp @ 7750 rpm
Max Torque: 80 Nm / 8.2 kgf-m / 59 lb-ft. @ 5800 rpm 86 Nm / 8.8 kgf-m / 63 lbs/ft @ 6000 rpm 175 Nm / 17.8 kgf-m / 129 lb-ft @ 5250 rpm
Clutch: Cable-operated multiplate-plate wet clutch Multi-plate clutch in oil bath, mechanically operated Multiplate wet clutch, hydraulically activated
Transmission: 6 Speed 6 Speed 6 Speed
Final Drive: Belt drive with shock damper Belt Shaft
Gear Ratio: 1st 2.46 / 2nd 1.75 / 3rd 1.38 / 4th 1.17 / 5th 1.04 / 6th 0.96:1 1st 2.462 / 2nd 1.750 / 3rd 1.381 / 4th 1.227 / 5th 1.130 / 6th 1.042: 1 1st 2.23 / 2nd 1.641 / 3rd 1.319 / 4th 1.101 / 5th 0.926 / 6th 0.788
Frame: Bridge-type aluminium frame Bridge frame made aluminium, load-supporting engine Chill-cast rear frame, aluminium, extruded sections
Front Suspension: 43mm Telescopic forks, ∅43mm Telescopic fork Dual longitudinal control arm
Front Wheel Travel: 140 mm / 5.5 in. 125 mm / 4.9 in. 115 mm / 4.8 in
Rear Suspension: Die-cast aluminium single sided swinging arm with rear wheal axle and eccentric adjustment, central spring stud , spring pre-loaded hydraulically adjustable to continuously variable levels by means of handwheel, rebound damping adjustable. Cast aluminium double-sided swing arm, central, suspension strut, spring pre-tension by means of hand Paralever (single-sided swing arm), central spring strut, rebound/continuously variable
Rear Wheel Travel: 140 mm / 5.5 in 125 mm / 4.9 in. 135 mm / 5.3 in
Front Brakes: 2 x ∅320 mm discs, 4 piston calipers 2 x ∅320mm discs, 4 piston calipers 2 x ∅320mm discs, 4 piston calipers
Rear Brakes: Single ∅265 mm disc, 2 piston caliper Single ∅265mm disc, 1 piston caliper Single ∅320mm disc, 2 piston caliper
Wheels: Cast aluminium Cast aluminium Cast aluminium wheels
Front Tyre: 120/70 ZR17 120/70 ZR17 120/70 ZR17
Rear Tyre: 180/55 ZR17 180/55 ZR17 190/55 ZR17
Castor: 95 mm / 3.7 in. 91 mm / 3.6 in. 108.4 mm / 4.3 in
Dimensions: Length: 2195 mm / 86.4 in. Width: 860 mm / 33.9 in. (incl. mirrors) Height: 1225 mm / 48.2 in. (excl. mirrors) Length 2145 mm / 84.4 in. Width 905 mm / 35.6 in. (incl. mirrors) Height 1160 mm / 45.7 in (excl. mirrors) Length: 2489m m / 98.0 in Width: 1000 mm / 39.4 in Height: 1465 mm / 57.7 in
Seat Height: 820 mm / 32.3 in. (low seat: 790 mm / 31.1 in.) 800 mm / 31.5 in. (low seat: 775 mm / 30.5 in., high seat: 825 mm / 32.5 in) 810 - 830 mm / 31.9 - 32.7 in (standard) 780 - 800 mm / 30.7 - 31.5 in(optional rider seat) 750 mm / 29.5 in (special accessory seat, single-section)
Dry Weight: 187 kg / 412 lbs 177 kg / 390 lbs 321 kg / 708 lbs
Wet-Weight: 209 kg / 461 lbs 199 kg / 439 lbs. 348 kg / 768 lbs
Fuel Capacity: 16 Litres / 4.2 US gal. 16 Litres / 4.2 US gal 26.5 Litres / 7.0 US gal
Standing ¼ Mile: 12.2 sec 12.0 sec 11.7 sec
Top Speed: 219.7 km/h / 136.5 mph 218 km/h / 135.5 mph 239.2 km/h / 148.6 mph