Bimota DB9 Brivido (2012) vs Benelli TRK 502X (2018-19) vs Benelli 654 Quattro (1980)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Bimota | Benelli | Benelli |
| Model: | DB9 Brivido | TRK 502X | 654 Quattro |
| Years: | 2012 | 2018-19 | 1980 |
| Engine: | Four stroke, 90°“L”twin cylinder, SOHC, desmodromic 4 valve per cylinder, | Parallel twin, DOHC, 8 valves | Four stroke, transverse four cylinder, DOHC, 2 valves per cylinder |
| Capacity: | 1198cc / 73.1 cub. in. | 499.6 cc / 30.5 cu in | 603.9 cc / 36.9 cu in |
| Bore x Stroke: | 106 x 67.9 mm | 69 x 66.8 mm | 60 x 53.4 mm |
| Cooling System: | Liquid cooled | Liquid cooled | Air cooled |
| Compression Ratio: | 11.5:1 | 11.5:1 | 9.3:1 |
| Induction: | Electronic fuel injection | EFI with 37 mm throttle body | 4 x 22mm Dell'Orto carbs |
| Ignition: | Magneti Marelli | ECU - TL1 | Mechanical breaker points |
| Starting: | Electric | Electric | Electric |
| Max Power: | 120.8 kW / 162 hp @ 9500rpm | 35.8 kW / 48 hp @ 8500 rpm | 44.7 kW / 60 hp @ 8700 rpm |
| Max Torque: | 131 Nm / 13.4 kgf-m / 96.6 lb-ft @ 8000 rpm | 45 Nm / 4.59 kgf-m @ 5000 rpm | 5.1 Nm / 5.1 kgf-m / 37 ft-lb @ 7000 rpm |
| Clutch: | Wet multiple plates, hydraulic system | Multidisc wet clutch | Wet sump |
| Transmission: | 6 Speed | 6-Speed | 5 Speed |
| Final Drive: | Chain | Chain | Chain |
| Front Suspension: | Monoshock adjustable for preload high and low speed 'extension and compression | 50 mm USD fork, adjustable | Tele-hydraulic forks |
| Front Brakes: | 2x 320 mm discs, Brembo radial calipers with 4 pads separated | Dual 320 mm floating discs, 4-piston calipers, ABS | 2 x 265 mm discs |
| Rear Brakes: | Single 220mm disc, 2 piston Brembo caliper | Single 260 mm disc, 2-piston caliper, ABS | Single 260 mm disc |
| Front Tyre: | 120/70 ZR17 | 110/80- R19 - M/C 59V | 3.25 -18 |
| Rear Tyre: | 190/55 ZR17 | 150/70 - R17 – M/C 69V | 3.50 -18 |
| Fuel Capacity: | 18 Litres / 4.8 US gal | 20 Litres / 5.2 US gal | 12 Litres / 3.2 US gal |