Bimota DB6 Delirio (2011) vs Benelli 125 Enduro (1980)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Bimota | Benelli |
| Model: | DB6 Delirio | 125 Enduro |
| Years: | 2011 | 1980 |
| Engine: | Four stroke, 90°“L”twin cylinder, SOHC, desmodromic 2 valves per cylinder | Two stroke, twin cylinder |
| Capacity: | 1079 cc / 65.8 cub in. | 125 cc / 7.6 cu in |
| Bore x Stroke: | 98 x 71.5 mm | 56 x 49 mm |
| Compression Ratio: | 10.0:1 | 9.83:1 |
| Cooling System: | Air / oil cooled | Air/oil cooled |
| Induction: | Electronic fuel injection, 45mm throttle body | Dell'Orto VHB 22BS |
| Ignition: | Marelli electronic | Flywheel magneto 6 volt |
| Starting: | Electric | Kick start |
| Clutch: | Dry multi-plate with hydraulic control | Wet, multiplate |
| Transmission: | 6 Speed | 5 Speed |
| Final Drive: | Chain | Chain |
| Gear Ratio: | 1st 12.5:1 / 2nd 8.333:1 / 3rd 6.25:1 / 4th 5.263:1 / 5th 4.5455:1 / 6th 4:1 | 1st 27.45 / 2nd 16.73 / 3rd 12.88 / 4th 10.67 / 5th 8.87:1 |
| Frame: | 25/20 mm chrome-molybdenum steel trellis with aluminium machined plates | Welded, tubular, twin-downtube cradle. |
| Front Suspension: | 50 mm Marzocchi upside-down with TiN treatment 120mm wheel travel | Telescopic, oil damped. |
| Rear Suspension: | Straight connection with full adjustable monoshock, 130mm wheel travel | Box-section swinging arm controlled by oil-damped, coil-sprung suspension units with 3 pre-load settings. |
| Front Brakes: | 2x 320mm discs 4 piston calipers | 135 mm Drum |
| Rear Brakes: | Single 220mm disc 2 piston caliper | 135 mm Drum, caliper type |
| Seat Height: | 830mm / 32.7in | 813 mm / 32.0 in |
| Dimensions: | Length 2045 mm / 80.5 in. Width 750 mm / 29.5 in. Height: 1230 mm / 48.4 in. | Length: 1971 mm / 77.6 in Width: 841 mm / 33.1 in Height: 1120 mm / 44.1 in |
| Dry weight: | 165 kg / 363.8 lbs. | 98kg / 2161b. |
| Fuel Capacity: | 16 Litres / 4.2 US gal | 8.5 Litres / 1.9 US gal. |