Benelli TRK 502X (2018-19) vs Benelli Tornado Tre 1130 (2006-07)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Benelli | Benelli |
| Model: | TRK 502X | Tornado Tre 1130 |
| Years: | 2018-19 | 2006-07 |
| Engine: | Parallel twin, DOHC, 8 valves | Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder |
| Capacity: | 499.6 cc / 30.5 cu in | 1130 cc / 69 cu in |
| Bore x Stroke: | 69 x 66.8 mm | 88 x 62 mm |
| Compression Ratio: | 11.5:1 | 11.5:1 |
| Cooling System: | Liquid cooled | Liquid cooled |
| Exhaust: | With catalytic converter and oxygen sensors | With catalytic converter and oxygen sensor |
| Induction: | EFI with 37 mm throttle body | Electronic injection with 1 injector per cylinder |
| Ignition: | ECU - TL1 | Electronic injection |
| Max Power: | 35.8 kW / 48 hp @ 8500 rpm | 120 kW / 163 hp @ 10500 rpm |
| Max Torque: | 45 Nm / 4.59 kgf-m @ 5000 rpm | 124 Nm / 12.6 kgf-m / 91.45 lb-ft @ 8000 rpm |
| Clutch: | Multidisc wet clutch | Wet clutch with hydraulic command |
| Transmission: | 6-Speed | 6 Speed |
| Final Drive: | Chain | Chain drive, ratio 16:37 |
| Frame: | Steel tube trellis frame | Mixed solution. Front: ASD steel tube trellis, fastened to boxed rear section, aluminium alloy castings. Subframe: aluminium die-cast. |
| Front Suspension: | 50 mm USD fork, adjustable | Marzocchi “upside down” stanchion fork Ø 50mm, adjustable in compression and extension with spring pre-load |
| Rear Suspension: | Rear swing arm with central shock absorber, spring preload, hydraulic rebound and compression setting adjustable | Asymmetric swingarm, composed of cast aluminium and pressed in aluminium alloy, with Extreme Technology single shock absorber adjustable in compression, dual regulation for low and high speed damping andextension and spring pre-load. |
| Front Brakes: | Dual 320 mm floating discs, 4-piston calipers, ABS | 2 x 320mm Ø discs, 4 piston caliper |
| Rear Brakes: | Single 260 mm disc, 2-piston caliper, ABS | Single 240 mm Ø disc, 2 piston caliper |
| Front Tyre: | 110/80- R19 - M/C 59V | 120/70-17 |
| Rear Tyre: | 150/70 - R17 – M/C 69V | 190/50-17 |
| Wheelbase: | 1525 mm / 60 in | 1419 mm / 55.9 in |
| Ground Clearance: | 220 mm / 8.6 in | 140 mm / 5.7 in |
| Seat Height: | 840 mm / 33 in | 807 mm / 31.8 in |
| Dry Weight: | 213 kg / 469.5 lbs | 195 kg / 430 lbs |
| Fuel Capacity: | 20 Litres / 5.2 US gal | 20.8 Litres / 5.5 gal |