Aprilia RSV-4 Factory (2009) vs Aprilia RS 125 R (2009)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Aprilia | Aprilia |
| Model: | RSV-4 Factory | RS 125 R |
| Years: | 2009 | 2009 |
| Engine: | Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder | Single cylinder, two stroke, reed valves induction, aluminium cylinder with Nikasil coated liner |
| Capacity: | 998.9 cc / 61 cu in | 124.8 cc / 7.5 cu in |
| Bore x Stroke: | 78 x 52.3 mm | 54 x 54.5mm |
| Compression Ratio: | 12.8:1 | 12.5:1 |
| Cooling System: | Liquid cooled | Liquid cooled |
| Induction: | Variable height intake trumpets. Airbox with aerodynamic side intakes. 4 Throttle bodes, 8 injectors, ride-by-wire fuel management. Multi-mapping | Dell'Orto PHBH 28 carburetor |
| Lubrication: | Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling) | Separate mixing, volumetric pump |
| Ignition: | Electronic digital ignition integrated in the fuel management system. | CDI electronic ignition |
| Starting: | Electric | Electric |
| Max Power: | 132 kW / 180 hp @ 12500 rpm | 21 kW / 28 hp @ 10500 rpm |
| Max Torque: | 115 Nm / 11.7 kgf-m / 84.8 lb-ft @ 10000 rpm | 19 Nm / 1.9 kgf-m / 14.1 lb-ft @ 9000 rpm |
| Clutch: | Multi-plate wet clutch with slipper device. | Wet, multi-disc |
| Transmission: | 6 Speed | 6 Speed |
| Final drive: | Chain: Drive ratio: 40/16 (2,5) | 17:40 |
| Frame: | Twin beam aluminium frame with mixed cast and pressed sheet sections. Adjustments for headstock position and angle, engine height, swingarm pivot height. | Cast aluminium, reinforced box section, sloping twin-spar frame |
| Front Suspension: | Öhlins Ø43 mm upside-down fork. Lower fork bottoms for radial calipers. Adjustment for preload, compression and rebound. | Upside-down forks, Ø 40mm |
| Front Wheel Travel: | 120 mm / 4.7 in | 120 mm / 4.7 in |
| Rear Suspension: | Double arch aluminium swingarm; mixed thin-wall casting and pressed sheet construction. Öhlins monoshock with piggy-back cylinder. Adjustments for compression, rebound, spring preload and length. APS rising rate linkages. | Monoshock, cast aluminium box section swingarm with asymmetric members |
| Rear Wheel Travel: | 130 mm / 5.1 in | 120 mm / 4.7 in |
| Front Brakes: | 2 x Ø320 mm lightweight stainless steel floating discs, Brembo monobloc radial calipers with 4 opposed pistons. Sintered pads. Radial master cylinder. Metal braided brake line. | Single 320 mm floating discs, 4 piston radial caliper |
| Rear Brakes: | Single Ø220 mm disc. Brembo floating caliper with 2 insulated pistons. Sintered pads. Master cylinder with integral reservoir. Metal braided brake line. | Single 220 mm disc, 2 piston caliper |
| Front Tyre: | 120/70 ZR17 | 110/70-17 |
| Rear Tyre: | 190/55 ZR17 | 150/60-17 |
| Dimensions: | Length: 2040 mm / 80.3 in Width: 735 mm / 28.9 in (at the handlebar) Height: 1120 mm / 44.1 in | Length: 1955 mm / 77.0 in Width: 720 mm / 28.3 in Height: 1100 mm / 43.3 in |
| Seat Height: | 845 mm / 33.3 in | 805 mm / 31.7 in |
| Dry Weight: | 179 Kg / 395 lbs | 127 kg / 280 lbs |
| Wet Weight: | 205 Kg / 453 lbs | 142 kg / 313 lbs |
| Top Speed: | 289.9 km/h / 180.14 mph | 155 km/h / 96 mph |