Aprilia RS 125 R Max Biaggi Superbike Replica (2010) vs Aprilia Tuono V4 R APRC (2015)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Aprilia | Aprilia |
| Model: | RS 125 R Max Biaggi Superbike Replica | Tuono V4 R APRC |
| Years: | 2010 | 2015 |
| Engine: | Single cylinder, two stroke, reed valves induction, aluminium cylinder with Nikasil coated liner | Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder |
| Capacity: | 124.8 cc / 7.5 cu in | 998,9 cc / 60.9 cu-in |
| Bore x Stroke: | 54 x 54.5mm | 78 x 52.3 mm |
| Compression Ratio: | 12.5:1 | 13.0:1 |
| Cooling System: | Liquid cooled | Liquid cooled |
| Lubrication: | Separate mixing, volumetric pump | Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling) |
| Induction: | Dell'Orto PHBH 28 carburetor | Airbox with front dynamic air intakes; 4 Weber-Marelli Ø48-mm throttle bodies with 4 injectors and latest generation Ride-by-Wire engine management. |
| Ignition: | CDI electronic ignition | Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and stick-coil type coils |
| Starting: | Electric | Electric |
| Alternator: | 12V, 180W | Flywheel mounted 450W alternator with rare earth magnets |
| Max Power: | 21 kW / 28 hp @ 10500 rpm | 126.8 kW / 170 hp @ 11500 rpm |
| Max Torque: | 19 Nm / 1.9 kgf-m / 14.1 lb-ft @ 9000 rpm | 111.5 Nm / 11.4 kgf-m 82.2 lb/ft @ 9500 rpm |
| Clutch: | Wet, multi-disc | Multiplate wet clutch |
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | 17:40 | Chain, drive ratio: 42:16 (2,625) |
| Primary Drive: | 63:19 | Straight cut gears and integrated flexible coupling, drive ratio: 73:44 (1,659) |
| Frame: | Cast aluminium, reinforced box section, sloping twin-spar frame | Aluminum dual beam chassis with pressed and cast sheet elements. Steering Damper: Sachs |
| Front Suspension: | Upside-down forks, Ø 40mm | Sachs upside-down one by one fork, stanchions 43 mm. Forged aluminum feet for radial calliper mounting; Completely adjustable spring preload and hydraulic compression and rebound damping; |
| Front Wheel Travel: | 120 mm / 4.7 in | 120 mm / 4.7 in |
| Rear Suspension: | Monoshock, cast aluminium box section swingarm with asymmetric members | Double braced aluminum swingarm; mixed low thickness and sheet casting technology; Sachs piggy back monoshock with completely adjustable: spring preload and hydraulic compression and rebound damping. APS progressive linkage; |
| Rear Wheel Travel: | 120 mm / 4.7 in | 130 mm / 5.1 in |
| Front Brakes: | Single 320 mm floating discs, 4 piston radial caliper | 2 x Ø320 mm floating stainless steel discs with lightweight stainless steel rotor with 6 studs. Brembo monobloc radial callipers M432 with 4 horizontally opposed Ø32 mm pistons. Sintered pads. Axial pump master cylinder and metal braided brake hoses. |
| Rear Brakes: | Single 220 mm disc, 2 piston caliper | Single Ø220 mm diameter disc, Brembo floating calliper with two Ø32 mm isolated pistons. Sintered pads. Pump with integrated tank and metal braided hose. |
| Wheels: | Aluminium alloy | Cast aluminum wheels with 3 split spoke design |
| Front Tyre: | 110/70-17 | 120/70 ZR17 |
| Rear Tyre: | 150/60-17 | 190/55 ZR 17 (alternative: 190/50 ZR 17; 200/55 ZR 17) |
| Dimensions: | Length: 1955 mm / 77.0 in Width: 720 mm / 28.3 in Height: 1100 mm / 43.3 in | Length: 2065 mm / 81.2 in Width: 800 mm / 31.4 in (at the handlebar) Height : 1090 mm / 42.9 in |
| Wheelbase: | 1345 mm / 53.0 in | 1435 mm / 56.8 in |
| Seat Height: | 805 mm / 31.7 in | 833 mm / 32.8 in |
| Dry Weight: | 127 kg / 280 lbs | 183 kg / 403.4 lbs |
| Fuel Capacity: | 14 Litres / 3.7 US gal | 18 Liters / 4.8 US gal |