Aprilia 125 Red Rose (1989-) vs BMW R 1200CL (2004)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Aprilia | BMW |
| Model: | 125 Red Rose | R 1200CL |
| Years: | 1989- | 2004 |
| Engine: | Single cylinder, two-stroke | Four stroke, two cylinder horizontally opposed Boxer, 4 valves per cylinder |
| Capacity: | 124.7 cc / 7.5 cu in | 1170 cc / 71.4 cu in. |
| Bore x Stroke: | 54 x 54.5 mm | 101 x 73mm |
| Compression Ratio: | 15 :1 | 10.0:1 |
| Cooling System: | Liquid cooled | Air/Oil cooled |
| Induction: | Dell'Orto PHBH 25 R5 carburetor | Bosch Motronic MA 2.4 Fuel injection |
| Ignition: | CDI | Digital CDI Bosch Electronic |
| Starting: | Electric | Electric |
| Battery: | 12V - 9Ah | BMW Mareg, 19.5 Amp/h low maintenance |
| Max Power: | 27.2 hp @ 10000 rpm | 44.5 kW / 61 hp @ 5000 rpm |
| Max Torque: | 2.4 kgf-m @ 8000 rpm | 98 Nm / 10.0 kgf-m / 72.27 lb-ft @ 3000 rpm |
| Transmission: | 6 Speed | 5 Speed |
| Final Drive: | Chain | Shaft |
| Frame: | Double open cradle | Three section composite frame consisting of front & rear section, load bearing engine |
| Front Suspension: | Telescopic fork | Motorrad Telelever, stanchion ∅35mm, central strut |
| Rear Suspension: | Dual Hydraulic shock absorbers | Die cast aluminium single sided swinging arm with BMW Motorrad Monolever, WAD strut (travel related damping), spring preload adjustable to continuously variable levels by means of hydraulic handwheel. |
| Front Brakes: | Single 260 mm disc | 2 x ∅305mm discs, 4 piston calipers |
| Rear Brakes: | Single 240 mm disc | Single ∅285mm disc, 2 piston caliper |
| Front Tyre: | 90/90-19 | 100/90-18 |
| Rear Tyre: | 130/90-16 | 170/80-15 |
| Seat Height: | 830 mm / 32.7 in | 745 mm / 29.3 in |
| Dry Weight: | 120 kg / 264.5 lbs | 289 kg / 637 lbs |
| Fuel Capacity: | 10 Litres / 2.6 US gal | 17.5 Litres / 4.5 gal |