Aprilia RSV-4 Factory (2010) vs Kawasaki Z 300 (2017-18) vs Honda CBR 1000F (1997) vs Laverda OR600 Atlas (1986-87) vs Honda VT 750DC Black Widow (2004-05) vs Honda CB 400SF Super Four (1999-02) vs Honda CBR 1000F (1999) vs Yamaha TDM 850 (1996-98) vs Honda XL 1000V Varadero (1999-00) vs Honda CBF 500 (2006-07) vs Yamaha YZF-R 3 Monster Moto GP Replica (2020) vs Ducati Streetfighter V4 SP (2022)

Comparison technical specifications

Add bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike
Make:	Aprilia	Kawasaki	Honda	Laverda	Honda	Honda	Honda	Yamaha	Honda	Honda	Yamaha	Ducati
Model:	RSV-4 Factory	Z 300	CBR 1000F	OR600 Atlas	VT 750DC Black Widow	CB 400SF Super Four	CBR 1000F	TDM 850	XL 1000V Varadero	CBF 500	YZF-R 3 Monster Moto GP Replica	Streetfighter V4 SP
Years:	2010	2017-18	1997	1986-87	2004-05	1999-02	1999	1996-98	1999-00	2006-07	2020	2022
Engine:	Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder	Four stroke . parallel twin, DOHC, 4 valves per cylinder.	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder, 180° crankshaft	Four stroke, 52°V-twin, SOHC. 3 valve per cylinder	Liquid cooled, transverse four cylinders, four stroke,	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Liquid cooled, four -stroke, parallel twin cylinder, DOHC, 5 valves per cylinder	Four stroke, 90°V-twin cylinder, DOHC, 4 valve per cylinder.	Four stroke, parallel twin cylinder, 4 valve per cylinder.	Four stroke, parallel twin cylinder, DUHC, 4 valve per cylinder	Four stroke, Desmosedici Stradale 90° V4, counter-rotating crankshaft, 4 Desmodromic timing, 4 valves per cylinder
Capacity:	999.6 cc / 61 cu in	296 cc / 18.0 cu-in	998 cc / 60.9 cu-in	571.6 cc / 34.8 cu-in	745 cc / 45.7 cu-in	399 cc / 24.3 cu in	998 cc / 60.9 cu-in	849 cc / 51.8 cu-in	996 cc / 78 cu-in	499 cc / 30.4 cu-in	321 cc / 19.5 cu-in	1103 cc / 67.3 cu in
Bore x Stroke:	78 x 52.3 mm	62 x 49 mm	77 x 53.6 mm	76 x 63 mm	79 x 76 mm	55 x 42 mm	77 x 53.6 mm	89.5 x 67.5 mm	98 x 66 mm	73 x 59.6 mm	68.0 x 44.1mm	81 x 53.5 mm
Compression Ratio:	12.8:1	10.6:1	10.5:1	9.1:1	9.6:1	11.3:1	10.5:1	10.5:1	9.8:1	10.5:1	11.2:1	14.0:1
Induction:	Variable height intake trumpets. Airbox with aerodynamic side intakes. 4 Throttle bodes, 8 injectors, ride-by-wire fuel management. Multi-mapping	Fuel injection: ø32 mm x 2 (Keihin), with dual throttle valves	4x 38mm Keihin carburetors	Dell'Orto twin choke	Two 36mm diaphragm-type CV	4x 32mm carbs	4x 38mm Keihin carburetors	2 x Mikuni BDSR38 carburetors	3x 42 mm Keihin CV carbs	2x 34mm slanted flat-slide VP-type carburetors	Electronic Fuel Injection, 32 mm throttle body	Electronic fuel injection system. Twin injectors per cylinder. Full ride-by-wire elliptical throttle bodies
Starting:	Electric	Electric	Electric	Electric	Electric	Electric	Electric	Electric	Electric	Electric	Electric	Electric
Max Power:	132 kW / 180 hp @ 12500 rpm	38 hp / 28.3 kW @ 11,000rpm	132 hp / 96.2 kW @ 9500 rpm	50 hp / 36.4 kW @ 7500 rpm	43 hp / 32.1 kW @ 5500 rpm	53 hp / 38.6 kW @ 10000 rpm	132 hp / 96.2 kW @ 9500 rpm	77 hp / 56.1 kW @ 7500 rpm (rear tyre 75 hp @ 7500 rpm )	94 hp / 69 kW @ 8000 rpm (86.1 hp @ 8000 rpm)	56 hp / 41.2 kW @ 9500 rpm	30.9 kW 41.4 hp @ 10750 rpm	153 kW / 208 hp @ 12750 rpm
Max Torque:	115 Nm / 11.7 kgf-m / 84.8 lb-ft @ 10000 rpm	19.9 lb-ft / 26.9 Nm @ 10,000rpm	104 Nm / 76.7 lb-ft @ 8500 rpm	50 Nm / 36.8 lb-ft @ 4800 rpm	60.5 Nm / 44 ft-lb @ 3000 rpm	40.1 Nm / 29.5 lb-ft @ 7500 rpm	104 Nm / 76.7 lb-ft @ 8500 rpm	80.4 Nm / 59.2 lb-ft @ 6000 rpm	99 Nm / 73.0 ft.lbs @ 6000 rpm	45 Nm / 33.2 lb-ft @ 8000 rpm	29.6 Nm / 3.0 kg-m @ 9000 rpm	123 Nm / 90.4 lb-ft @ 11500 rpm
Final drive:	Chain: Drive ratio: 40/16 (2,5)	Chain	Chain	Chain	Shaft	Chain	Chain	Chain	Chain	Chain	“O” ring chain	Chain 525, Front sprocket 15, Rear sprocket 42
Front Suspension:	Öhlins Ø43 mm upside-down fork. Lower fork bottoms for radial calipers. Adjustment for preload, compression and rebound.	37mm hydraulic telescopic fork	Telescopic air assisted and ant-dive.	Air assisted telescopic forks	41mm Telescopic fork.	41mm Telescopic forks	Telescopic air assisted and ant-dive.	Conventional 43mm forks, adjustable preload: rebound damping	43mm telescopic fork	41mm telescopic fork	37 mm USD Inverted telescopic fork	Öhlins NIX30 43 mm fully adjustable fork with TiN treatment. Electronic compression and rebound damping adjustment with Öhlins Smart EC 2.0 event-based mode
Rear Suspension:	Double arch aluminium swingarm; mixed thin-wall casting and pressed sheet construction. Öhlins monoshock with piggy-back cylinder. Adjustments for compression, rebound, spring preload and length. APS rising rate linkages.	Bottom-Link Uni-Trak with gas-charged shock and 5-way adjustable preload	Pro-link monoshock. 6-way preload. 3-way rebound damping adjust	Single shock	Dual shocks 5-way spring-preload adjustability	Swing arm, Pro-link monoshock	Pro-link monoshock. 6-way preload. 3-way rebound damping adjust	Single De Carbon shock, adjustable preload: rebound damping	Pro-Link with spring preload damper, rebound damping adjustable	Monoshock damper with 7-step adjustable preload	Monocross single Kayaba shock, adjustable preload	Fully adjustable Öhlins TTX36 unit. Electronic compression and rebound damping adjustment with Öhlins Smart EC 2.0 event-based mode. Aluminium single-sided swingarm
Front Brakes:	2 x Ø320 mm lightweight stainless steel floating discs, Brembo monobloc radial calipers with 4 opposed pistons. Sintered pads. Radial master cylinder. Metal braided brake line.	Single 290 mm petal disc 2 piston caliper	2x 296mm discs 2 piston calipers	Single 260mm disc 2piston calliper	Single 296 mm disc 2 piston caliper	2x 296mm discs 4 piston calipers	2x 296mm discs 2 piston calipers	2 x 298mm discs 4 piston calipers	2x 296mm discs 3 piston calipers	2x 296mm discs 2 piston calipers (ABS)	Single 298mm disc 2 piston caliper, ABS available	2 x 330 mm semi-floating discs, radially mounted Brembo Monobloc Stylema® R 4-piston callipers with . Self bleeding Brembo MCS 19.21 master cylinder
Rear Brakes:	Single Ø220 mm disc. Brembo floating caliper with 2 insulated pistons. Sintered pads. Master cylinder with integral reservoir. Metal braided brake line.	Single 220 mm petal disc 2 piston caliper	Single 276mm disc 2 piston caliper	Single 230mm disc 1 piston calliper	180 mm Drum	Single 240mm disc 2 piston caliper	Single 276mm disc 2 piston caliper	Single 245mm disc 2 piston caliper	Single 256mm disc 3 piston caliper	Single 240mm disc 1 piston caliper (ABS)	Single 220mm disc 1 piston caliper, ABS available	Single 245 mm disc, 2-piston calliper
Front Tyre:	120/70 ZR17	110/70-17	120/70-17	90/90-21	110/80 -R19	110/80-18	120/70-17	110/80 ZR18	110/80 R19	120/70 ZR17	110/70-17M/C 54H	120/70 ZR17 Pirelli Diablo Rosa Corsa II
Rear Tyre:	190/55 ZR17	130/70-17	170/60-17	130/80-17	170/80 -R15	140/70-17	170/60-17	150/70 ZR17	150/70 R17	160/60 ZR17	140/70-17M/C 66H	200/60 ZR17 Pirelli Diablo Rosa Corsa II